About the DS98 range
DS98 AC surge protector is used for the 'secondary' protection of the single-phase networks against the surge voltages creating by lightning. DS98 is equipped with an internal thermal safety which will disconnect the unit from the AC network in case of end of life. This disconnection will be indicated by the turn on of the red led in the front. Very compact, the DS98 surge protector must be installed close by the equipment to protect, downstream a 'primary' surge protector. DS98 provides both a common and differential mode protection.
Specifications
| CITEL part number | 3509011 |
| SPD type (IEC 61643) | 2+3 |
| Un — nominal line voltage | 230 Vac |
| Uc — max continuous operating voltage | 275 Vac |
| In — nominal discharge current | 5 kA |
| Imax — max discharge current | 10 kA |
| Up — voltage protection level | L/N: 1 kV; N/PE: 1.5 kV |
| Configuration | Single phase |
| Mounting | Symmetrical rail 35 mm (EN 60715) |
| Standards | IEC 61643-11 / EN 61643-11 / UL1449 ed.5 |
Specifications as published by CITEL. Confirm against the datasheet for your application.
CITEL datasheet for DS98-400 →
See the full CITEL Type 2+3 SPDs range → · All CITEL parts with prices