Steam Turbine Oils
- ISO VG 32, 46, 68 turbine oils
- Rust and oxidation-inhibited (R&O) grades
- EP (extreme-pressure) variants for geared turbines
- Premium synthetic options for high-temperature service
Steam System Lubrication Services Across India
Steam turbine oils, boiler-feed pump greases, heat-transfer fluids and IS-335 transformer oils for power, sugar, paper, fertilizer, refinery and pharma plants — pan-India site visits.
Steam-system lubrication is the structured supply, application, and condition-monitoring of lubricants for the rotating equipment that supports an industrial steam circuit — steam turbines, boiler-feed pumps, condensate pumps, ID/FD fans, deaerator pumps, ash-handling drives, and thermic-fluid heaters. Hyderabad pharma manufacturers (autoclaves, jacketed reactors, CIP cycles, fermentation, process heating) and power-sector buyers are the most active users of these lubricants regionally. Vasundhara Performance Solutions provides the full range — steam turbine oils, lithium complex and high-temperature greases for boiler-feed pumps, heat-transfer fluids for thermic-fluid heaters, and IS-335 transformer oils for boiler-house transformers — combined with on-site lubrication surveys, condition monitoring, and PSU-grade supply documentation. We serve power-generation plants, sugar mills, paper mills, fertilizer units, refineries, and pharmaceutical bulk-drug facilities across Hyderabad, Telangana, Andhra Pradesh, and pan-India through our group network.
Steam System Lubrication — Built for Reliability
Steam-system equipment runs hot, runs continuously, and is expensive to take offline unexpectedly. Our service combines premium lubricant supply with structured condition monitoring and on-site engineering support — so your turbines, feed pumps, fans, and thermic-fluid heaters keep running on the right oil at the right viscosity with the right change interval.
Our Steam System Lubrication Services
Boiler-Feed Pump & ID/FD Fan Greases
- Lithium complex high-temperature greases
- Calcium sulfonate greases for high-load bearings
- Synthetic polyurea greases for sealed fans
- OEM-approved EP greases (NLGI 2 / NLGI 3)
Heat-Transfer & Thermic Fluids
- Mineral heat-transfer fluids up to 320°C
- Synthetic grades for higher-temperature service
- System flushing and changeover support
- Used-fluid disposal coordination
IS-335 Transformer Oils
- Power and distribution transformer oils
- Boiler-house auxiliary transformer service
- Bulk supply (210L barrels, 1000L IBCs, tankers)
- BIS-certified test reports with each batch
On-Site Lubrication Surveys
- Equipment inventory and lubricant mapping
- Consolidation recommendations (reduce SKU count)
- OEM-spec verification and substitutions
- Documented lubrication schedule (CMMS-ready)
Used-Oil Analysis & Condition Monitoring
- Turbine oil sampling and lab analysis
- TAN, viscosity, particle count, water content, RBOT
- Trend reports and replacement-interval guidance
- Grease analysis for critical bearings
Key Benefits
Extend Bearing & Turbine Life
Right-grade lubricants applied at the right intervals — backed by used-oil monitoring — prevent premature failure of high-cost rotating equipment.
Reduce SKU Count & Inventory
Lubrication-survey consolidation typically cuts the number of distinct lubricants on site by 30-50% — simplifying procurement, storage and contamination risk.
Predict Failures Before They Happen
Used-oil and grease analysis surfaces wear-metal trends and contamination early, letting you schedule maintenance during planned outages instead of reacting to breakdowns.
PSU-Grade Documentation
Every supply ships with batch certificates, MSDS, OEM authorization, and BIS/IS test reports — ready for NTPC, BHEL, and state-utility audits.
Industries We Serve
Pharmaceuticals & Bulk-Drug (Hyderabad)
Power Generation (NTPC, state utilities)
Sugar Mills
Paper & Pulp Mills
Fertilizer Plants
Refineries & Petrochemicals
Food Processing & Dairy
Textiles & Chemicals
Frequently Asked Questions
What steam-system lubricants does Vasundhara supply?
Steam turbine oils (ISO VG 32, 46, 68 with rust and oxidation inhibitors), boiler-feed pump greases (lithium complex and high-temperature calcium sulfonate), ID/FD fan bearing lubricants, heat-transfer fluids for thermic fluid heaters, and IS-335 transformer oils for boiler-house transformers — supplied across Hyderabad, Telangana, Andhra Pradesh and pan-India through our group network.
Which industries use steam-system lubrication services in TG and AP?
Pharmaceutical bulk-drug manufacturers are the largest steam-system user base in Hyderabad — Dr Reddy’s, Aurobindo, Hetero, Divi’s, Granules, MSN, Mylan, Lupin and others run extensive boiler-fed steam circuits for autoclaves, jacketed reactors, CIP cycles, fermentation and process heating. We also serve power generation (NTPC Ramagundam, state thermal stations), sugar mills (Andhra Sugars, NCS Sugars), paper mills (Andhra Paper, Sirpur Paper), fertilizer plants (Coromandel, Nagarjuna), petrochemicals (HPCL Visakh, BPCL Kakinada), and food processing facilities — all rely on steam systems and benefit from structured lubrication management.
How often does steam-turbine oil need topping up or replacement?
Steam-turbine oils are highly refined mineral or synthetic oils with rust and oxidation inhibitors, designed for the bearing systems of steam turbines and turbine-generator sets. Top-up frequency depends on system size and operating temperature; full replacement is typically every 3 to 5 years guided by oil-condition monitoring (TAN, particle count, water content, RBOT). Vasundhara provides both oil supply and condition-monitoring as part of our service program.
Do you offer lubrication-survey or audit services for steam-system equipment?
Yes. Our engineers conduct on-site lubrication surveys for steam-system equipment — turbines, boiler-feed pumps, condensate pumps, ID/FD fans, deaerator pumps, and ash-handling drives. We assess current lubrication practices, identify consolidation opportunities, recommend product changes, and produce a documented lubrication schedule. Survey reports are delivered within 7-10 days of plant visit.
Can you supply heat-transfer fluids and provide flushing or changeover support?
Yes. We supply heat-transfer fluids (mineral and synthetic grades suitable for operating temperatures up to 320°C) for thermic-fluid heaters used in process industries. We also coordinate system flushing and used-fluid disposal through our partner network to support full fluid changeovers in pharma, textile and food processing facilities.
Is Vasundhara registered for PSU and government supply of steam-system lubricants?
Yes. Vasundhara Performance Solutions is GeM-registered and Udyam-registered, with active rate contracts and supply orders to PSU buyers including NTPC, BHEL, and state-level power utilities. We provide all required documentation — batch certificates, MSDS, OEM authorization letters, and IS/BIS test certificates — for tender and rate-contract supply.
Last updated: April 2026
Get a Steam-System Lubrication Survey
Our engineers visit your site, audit your current lubrication practices, recommend consolidation and OEM-spec products, and deliver a documented lubrication schedule within 7-10 days. PSU and government buyers welcome — we are GeM and Udyam registered.
Request a Lubrication Survey