Vasundhara Performance Solutions is the authorised HD Fire Protect supplier across India for the complete industrial fire-protection equipment range — landing valves and hydrant systems, automatic sprinkler systems (wet, dry, pre-action, deluge), foam pourer systems, water curtain nozzles, monitor nozzles, hose reels and fire-fighting cabinets. UL listed, FM approved, IS conforming, and NFPA compliant. Supply across Hyderabad, Telangana, Andhra Pradesh, pan-India project sites and PSU/Defence procurement through GeM. Hydraulic-design support, installation supervision, and post-installation testing included on project basis.
Request Site Survey Call: +91-9912825442Six product categories that together compose a complete factory, refinery, warehouse, high-rise or industrial-park fire-protection installation. Single-vendor sourcing through Vasundhara reduces project-management overhead, simplifies BOQ co-ordination, and ensures specification compatibility across the kit.
Landing valves, hydrant pillar posts and wet-riser assemblies to IS 5290, IS 909 and IS 13039, for multi-storey commercial and industrial buildings — typically the highest-volume fire-equipment line in a project BOQ. These are not HD Fire products. HD Fire makes no hydrant or landing valves; we source them from BIS-licensed manufacturers and supply the licence with the material.
HD Fire pendent, upright, horizontal and vertical sidewall, concealed, recessed, conventional and extended-coverage quick-response sprinklers, UL Listed and/or FM Approved, in wet-pipe, dry-pipe, pre-action and deluge configurations. Sprinkler density and spacing per NFPA 13. ESFR heads are not in the HD Fire range — for high-pile storage we quote ESFR from a manufacturer that makes them.
Deluge valves for transformer-yard cooling, oil-storage tank exterior protection, jet-fuel and chemical-storage areas. Activates simultaneous water/foam discharge across all sprinklers in a zone — used where rapid-response volume coverage matters more than precision sprinkler activation. Models from 50 mm through 200 mm valve sizes. UL listed.
Foam pourer systems for flammable-liquid storage tanks (Type II / Type III applications per NFPA 11). Foam-water sprinklers, foam-chamber pourer assemblies, fluoroprotein/AFFF/AR-AFFF foam concentrate compatibility. Manual and remote-operated monitor nozzles (high-flow water/foam projection) for refinery yard, fuel-handling areas, marine terminals.
Wall-mounted swinging hose reels with 25 mm or 38 mm hose, and cabinets in standard, recessed and semi-recessed styles, including stainless finishes for pharma and food plant. Hose reels are covered by IS 884. These are not HD Fire products — HD Fire manufactures no hose reels, hoses or cabinets, so we supply them from their makers and name the manufacturer on the quotation.
Open-pattern water-curtain nozzles for compartment-separation fire-stopping (typically protecting openings between fire zones). Mist nozzles for archive-protection and sensitive-equipment areas. Specialty nozzles for transformer-yard fire-spray rings, conveyor-belt protection in coal handling, and silo-protection systems.
How fire-protection equipment maps to specific industrial settings — typical product combinations, code/standard references, and common project scopes.
Tank-farm fire-water rings, deluge sprinklers on bunded oil-storage areas, foam-pourer assemblies on crude-oil tank rims, monitor nozzles for jet-fuel handling, water-spray rings on transformer yards. Standards: NFPA 11 (foam), NFPA 15 (water spray), OISD 116/117 (Indian Oil Industry Safety Directorate). Pairs with our refinery fire protection systems portfolio.
Wet-riser systems with single-headed landing valves, automatic sprinkler protection per NFPA 13, hose reels at strategic points, foam pourers where flammable-liquid storage is involved. Common across steel, automotive ancillary, fabrication, FMCG, and process-industry plants in Patancheru, Jeedimetla, IDA Bollaram, Bonthapally industrial corridors.
High-pile and rack storage above 7.6 m needs ESFR or in-rack sprinklers. Neither is an HD Fire product — we design the scheme to NFPA 13 and FM Global Data Sheet 8-9 and quote the heads from a manufacturer that makes them, alongside HD Fire valves, monitors and water-spray equipment for the rest of the system.
Wet-riser systems with landing valves at every floor/landing, automatic sprinkler protection per NBC India Group A2/A3 occupancy requirements, fire-fighting cabinets at each landing, water-curtain nozzles at floor-perforation crossings. State Fire Department NOC requirements per relevant building bye-laws (Telangana Fire Service Act, AP Fire Service Act).
Stainless-steel landing valves and hose reel cabinets (SS 304 standard, SS 316 cleanroom-adjacent), pendant sprinklers in production areas, foam-water sprinklers in solvent-handling rooms. Compliance with WHO-GMP / FDA inspection standards for the fire-protection installation. Pairs with our pharma cleanroom support.
Transformer-yard water-spray (deluge) rings, cable-tunnel CO2 / Novec suppression systems (sourced separately), boiler-house automatic sprinklers, coal-handling-plant water curtains. NTPC, NLC India, state electricity board procurement under GeM and approved-vendor channel. Standards: NFPA 850, IS 3034.
Standard certifications across the HD Fire Protect equipment range — what to specify in your BOQ for state Fire NOC + insurance audit acceptance.
| Approval / Standard | Coverage | Why it matters |
|---|---|---|
| UL Listed (UL 199 sprinklers, UL 260 deluge and alarm valves) | HD Fire sprinklers, deluge valves H2/H3/H5/A, H4 and HF40 nozzles | Required for IGCC / IFC compliant projects and global insurance acceptance |
| FM Approved (FM Class 2000 sprinklers) | HD Fire sprinklers; Varsha monitor nozzles; Wet Alarm Valve Model H under FM Approvals Europe CPR 2809-CPR-F0087 | FM Global insurance properties — premium-rate negotiation lever |
| VdS approved · BIS · CE Marking · ASME | Per product, as published by HD Fire | HD Fire also holds ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 through TUV Nord. It does not claim BIS licence, so neither do we. |
| IS 5290 (Landing Valves) | Landing valves — sourced, not HD Fire | Indian Standard required for state Fire Department NOC. HD Fire does not manufacture landing valves; we supply them from a BIS-licensed maker and hand you that licence. |
| IS 13039:1991 (Hydrant System Design) | System layout + flow specifications | Indian Standard for fire hydrant system installation |
| IS 884 (First-Aid Hose Reels) | Hose reels — sourced, not HD Fire | Indian Standard for first-aid hose reels. Note that branch pipes are IS 903, not IS 884. |
| IS 909 (Underground Fire Hydrant, Sluice-Valve Type) | Yard hydrants — sourced, not HD Fire | Indian Standard for underground sluice-valve-type hydrants. |
| NFPA 13 (Sprinkler Systems) | Sprinkler design + installation | Global gold-standard for sprinkler system engineering |
| NFPA 14 (Standpipe Systems) | Wet-riser + standpipe systems | Reference standard for high-rise fire-protection |
| NFPA 11 (Foam Systems) | Foam pourer + foam-water sprinkler systems | Tank-farm and flammable-liquid foam protection |
| OISD 116 / OISD 117 (Indian Oil Industry) | Refinery fire-water + foam systems | Mandatory for refinery + petrochemical fire-protection design |
HD Fire publishes named listings rather than a blanket count: sprinklers UL Listed and/or FM Approved, deluge valves H2/H3/H5/A UL Listed, Varsha monitor nozzles FM Approved, H4 and HF40 nozzles UL Listed, and Wet Alarm Valve Model H under FM Approvals Europe CPR 2809-CPR-F0087. We quote the listing that applies to the item you are buying rather than a range-wide claim. Specific-approval variants available for projects with stringent insurance or end-user requirements.
For fire-protection consultants, EPC contractors, plant safety officers and insurance audit teams — choice of distribution channel matters as much as product specification.
Vasundhara is authorised distributor for HD Fire Protect — India's leading fire-fighting equipment manufacturer with UL / FM / BIS / NFPA approvals across the product range. Genuine factory-supplied equipment with full warranty + traceable batch documentation per consignment.
Our engineers help size hydrant systems, sprinkler densities, foam-pourer counts per IS 13039 + NFPA 13/14/11 + OISD 116/117. Free for projects where Vasundhara is the equipment-supply partner. Co-ordinates with your fire consultant or directly with EPC contractors for complex multi-zone refinery/petrochemical projects.
One PO for hydrants + sprinklers + deluge + foam pourers + monitors + hose reels + cabinets. Reduces vendor count from 6-8 down to 1, simplifies project co-ordination, single accountable contact for the complete fire-protection BOQ. EPC contractor and project-management friendly.
Every consignment ships with IS conformance certificates, UL/FM listing cards (where applicable), BIS licence, hydrostatic pressure-test certificates, manufacturer authorisation letter, material composition reports. Audit-ready for state Fire NOC submissions, insurance audits, and PSU procurement compliance.
GeM-registered seller. HD Fire equipment available through GeM for Indian Railways, Defence stations, PSU campuses (BHEL, NTPC, NLC, Coal India, ONGC), state government buildings. GFR-2017 compliant for deferred-payment supply.
Stocked sizes (single + double-headed 63 mm landing valves, common pendant/upright sprinklers, popular hose reels) ship same-day from Secunderabad warehouse. Project-mode dispatch to refinery/petrochemical sites coordinated 2-4 weeks ahead. Logistic partnerships across India for site-direct delivery.
Common fire-protection installations and their typical equipment composition — useful for project budgeting and vendor evaluation.
| Installation Type | Typical Equipment Mix | Standards Referenced |
|---|---|---|
| Single-block factory, 4 floors, 1 acre | 4 wet-riser landing valves + 1 hydrant pillar post + 1 hose reel cabinet + 200 sprinklers | IS 13039, NFPA 13, NBC |
| Multi-storey commercial 10+ floors | 1 landing valve per floor + 2 hose reel cabinets per floor + sprinkler density per occupancy class | NBC India, NFPA 14 |
| Refinery tank-farm protection | Foam pourer assemblies + deluge water-spray rings + monitor nozzles + perimeter hydrant ring | NFPA 11, OISD 116, NFPA 15 |
| Warehouse high-pile storage | ESFR sprinklers + in-rack sprinklers + perimeter hydrant ring + multiple hose reel stations | NFPA 13, FM Global Data Sheet 8-9 |
| Pharma plant cleanroom-adjacent | SS 316 landing valves + pendant sprinklers + SS hose reel cabinets | WHO-GMP + IS 5290 + NFPA 13 |
| Substation transformer yard | Deluge water-spray ring + manual monitor + perimeter hydrant ring | NFPA 850, IS 3034, OISD 117 |
| Which of these are HD Fire products. Sprinklers, deluge valves, water-spray nozzles, monitors and monitor nozzles, foam pourers, foam concentrate and system valves are HD Fire. Landing valves, hydrant pillar posts, hose reels and cabinets, ESFR and in-rack sprinklers, and fire pumps are not — HD Fire does not manufacture them. We supply those from their makers and name the manufacturer on the quotation. | ||
Visit Our Office: H.No. 10-2-309, Flat No. 201, Sudha Vaishnavi Residency, Street No. 4, West Marredpally, Secunderabad, Telangana 500026 | View on Google Maps
Common questions from fire-protection consultants, EPC contractors, plant safety officers and insurance auditors evaluating industrial fire-protection systems.
A complete industrial fire-protection installation typically includes: (1) Fire-water source (underground tank + fire pumps + jockey pump), (2) Hydrant system (landing valves at strategic points + underground pillar posts + hose reels), (3) Automatic sprinkler system (per NFPA 13 density requirements), (4) Special hazard protection (deluge valves for transformer yards, foam pourers for flammable storage, water curtains for compartment separation), (5) Detection + alarm system (smoke detectors, manual call points, fire alarm panel), (6) Portable fire extinguishers (positioned per NFPA 10 spacing). Vasundhara supplies the equipment for items (2), (3), and (4) — pump, alarm, and extinguisher portfolios are sourced through complementary suppliers.
Mandatory for state Fire Department NOC + insurance compliance: IS 5290 (landing valves), IS 13039 (hydrant system design), IS 884 (hose reels), IS 909 (underground pillar posts), IS 3844 (internal hydrants and hose reels), IS 4989 (foam concentrate), IS 15105 (sprinkler systems). For refinery and petrochemical: OISD 116 (fire protection facilities) and OISD 117 (fire protection facilities for petroleum refineries). Indian insurers generally look for UL, FM or BIS certification on key equipment. Note that the Tariff Advisory Committee no longer issues approvals — IRDAI has de-notified the tariffs it set, including the All India Fire Tariff 2001, and refers to it as the erstwhile TAC. HD Fire equipment carries BIS certification, with UL and FM listings on the specific products that hold them.
Wet-pipe: pipes always full of water, fastest activation — for indoor heated areas (most common). Dry-pipe: pipes filled with pressurised air, water released when sprinkler activates — for unheated/outdoor areas where freezing is a risk. Pre-action: pipes empty, water released by separate detection trigger then sprinkler activation — for sensitive areas (server rooms, archives) where accidental discharge would be catastrophic. Deluge: pipes empty, all sprinklers in zone open simultaneously when triggered — for high-hazard areas (transformer yards, foam-water systems for flammable storage).
Per IS 13039 + insurer requirements, the typical baseline sizing: (a) Fire-water tank capacity = 1-4 hours of design demand at the most-onerous hazard zone, (b) Pump capacity = 137 to 2,250 LPM depending on building type and hazard class, (c) Hydrant spacing = 90 m maximum on perimeter rings, (d) Landing valves at every 30 m of riser column for multi-storey, (e) System pressure = minimum 3.5 bar at hydraulically-most-remote outlet. Insurance underwriter may impose additional requirements. Vasundhara's engineering team helps size systems for projects where we are the equipment supply partner.
Stocked items (single + double-headed 63 mm landing valves, common pendant/upright sprinklers, standard hose reels, hose pipes, hydrant cabinets) ship same-day for orders before 2 PM in Hyderabad/Telangana/AP. Project items (deluge valves, foam-pourer assemblies, monitor nozzles, water-spray nozzles, SS variants) typically 1-3 weeks from manufacturer dispatch. Large project supply (full BOQ for 1+ acre factory) typically scheduled 4-6 weeks ahead with phased delivery synced to construction milestones. Refinery and petrochemical project scopes scheduled 8-12 weeks for full-BOQ delivery.
Yes. Vasundhara is GeM-registered seller and HD Fire Protect industrial fire-protection equipment is available through GeM for PSU buyers — Indian Railways, Defence installations, PSU campuses (BHEL, NTPC, NLC India, Coal India, ONGC, RINL, SAIL), state government buildings, public-sector airports and ports. GFR-2017 compliant for deferred-payment supply. Documentation pack includes Udyam-MSME registration, Make-in-India certification (HD Fire is Indian-manufactured), and standard PSU procurement compliance suite.
Yes — single-source BOQ supply is one of the main reasons EPC contractors and project-management consultants source fire equipment through Vasundhara. One PO can list landing valves + sprinklers + deluge valves + foam pourers + monitor nozzles + hose reels + cabinets + water curtain nozzles. This reduces vendor count from typically 6-8 down to 1, simplifies project co-ordination, ensures specification compatibility across the kit, and consolidates accountability. Hydrostatic test certificates, IS conformance reports, manufacturer authorisation letters all bundled for audit submission.
They publish different things, and the difference is the whole basis for choosing. HD Fire Protect publish UL Listings and FM Approvals across sprinklers, deluge valves, alarm valves, foam equipment and monitors, plus VdS on water monitors and ASME on foam vessels — their published position is an international-approval manufacturer rather than an IS one. Padmini Industries publish actual BIS licence numbers against IS 5290, IS 884 and IS 444, which is the strongest published IS evidence of the group. NewAge Fire Fighting Co. Ltd. cite UL, FM, BSI and ISI approvals but publish no licence numbers. Ask any supplier for the licence or listing number, not the logo. HD Fire's structural advantages: (1) Wider international compliance — UL listing + FM approval + BIS licence, useful for export-oriented and IGCC/IFC-compliant projects, (2) Stronger range coverage on specialty configurations (deluge valves, foam pourers, monitor nozzles, water-spray nozzles, SS variants), (3) Modern manufacturing facility with consistent quality at scale, (4) Active India manufacturing supports Make-in-India procurement preference. For pure IS-only projects with cost optimisation as priority, alternatives are competitive — but for UL/FM-required installations, HD Fire is typically the right choice.
Yes. Vasundhara Performance Solutions Pvt Ltd is the authorised HD Fire Protect distributor based in Hyderabad, with active project supply across Telangana, Andhra Pradesh, pan-India project sites, and PSU/Defence procurement through GeM. We supply genuine HD Fire products with full manufacturer authorisation documentation provided on enquiry. For our complete HD Fire product portfolio (hydrant valves + sprinklers + deluge valves + hose reels + monitor nozzles + foam pourer systems), see our HD Fire Protect dealer page.
Explore the rest of the fire-safety portfolio + adjacent resources.
Send us your project drawing, fire NOC requirements, or BOQ — quote returned within 4 hours during business hours. EPC contractor and fire-consultant enquiries handled by our project-supply team.
Request Project Quote Call Now