Buying from outside India? We export industrial supplies from India with full documents. Export supply WhatsApp export desk
Skip to main content

Gearbox Oil Analysis and Wear Metal Testing

The oil in a gearbox carries the evidence of what is wearing inside it. A series of samples shows a failing gear or bearing before it stops the machine.

Request a quote

Industrial gears (representative image)
Representative image

How we supply

  1. Quote on working days, usually the same day, with delivered price and lead time
  2. GST tax invoice on every order
  3. Dispatch: stock items within 2 working days; other grades to order, lead time stated on the quote
  4. Data sheet: the manufacturer’s sheet goes out with the quote

Supplying industrial plants since 2016 · GSTIN 36AAFCV6218F1ZB · Udyam UDYAM-TS-02-0002151 · D-U-N-S 860399487

🧪 Testing through an accredited laboratory
📦 Sample kits couriered anywhere in India
📍 Sample pickup in Hyderabad and Secunderabad
⏱️ Report in 3–5 working days from receipt

What is tested

TestWhat it detectsCommon reference method
Wear metals (Fe, Cu, Pb, Sn, Al, Cr)Which component is wearing: gears, bearings, bushingsASTM D5185 (ICP)
Viscosity at 40 °C / 100 °CWrong-oil top-up, oxidation thickening, shearASTM D445
Water (Karl Fischer)Water ingress from seals, coolers and condensationASTM D6304
TAN (acid number)Acid build-up in the gear oilASTM D664
Particle countCleanliness code against the machine’s targetISO 4406
FTIROxidation and additive depletionASTM E2412

The reference methods are the published standards these tests are commonly run to; the laboratory report states the method actually used. We arrange the testing through an accredited laboratory and do not run an in-house laboratory.

Request a quote

Tell us how many gearboxes, the oil in each and how often you plan to sample.

Quoting for: Gearbox oil analysis

Short of time? Get a call back

We call during working hours. Your number is used only for this enquiry.

Buying several items? Send your whole list in one go →

Ask on WhatsApp

We use these details only to quote and supply. We do not sell or share them. See our Privacy Policy.

One sample and a trend

One sample shows the oil’s condition today. A series of samples from the same gearbox shows the trend, and the trend is what warns of a failing bearing or gear. Each result is read against the new-oil value and the machine’s own trend, not a single fixed limit.

How to take and send a sample

Take the sample from a point where the oil is flowing and mixed, never from the drain plug. Use the same point and the same method every time. With each sample send the machine and its location, the oil brand and grade, the hours on the oil and on the machine, and any top-ups since the last change. Without these, results can only be compared with new oil.

We courier labelled bottles, instructions and a submission form anywhere in India. In Hyderabad and Secunderabad we can also draw the sample at your site.

The report

Issued in 3–5 working days from receipt, by email as a PDF, with each result, its target range and a plain corrective action: continue, resample sooner, filter, or change the oil. If the oil has to be changed, we can quote the replacement from the brands we supply; see gear oils and the gear oil change interval guide.

For hydraulic systems see hydraulic oil testing; for compressors, turbines and engines see the oil analysis service.

Frequently Asked Questions

What does gearbox oil analysis show?

Wear metals that point to the component wearing, the viscosity of the oil, water content, acid number, particle count and oxidation.

Which wear metals are reported?

Iron, copper, lead, tin, aluminium and chromium. Read together with the machine’s own trend, they point to gears, bearings or bushings.

How often should a gearbox be sampled?

At a fixed interval, so the results form a trend. Critical gearboxes are sampled more often. We agree the schedule with you from your machine list.

Where should the sample be taken from?

From a point where the oil is flowing and mixed, never from the drain plug, and from the same point every time.

How long do results take?

The report is issued in 3–5 working days from receipt of the sample.

Do you send sample kits outside Hyderabad?

Yes. We courier a labelled sample kit anywhere in India and you return the sample by courier.

Send us your gearbox list

Send the gearboxes, the oil in each and how often you want to sample. We quote the test panel per sample on working days, usually the same day.

Request a quote

Related — oil analysis

Export desk on WhatsApp
Request a quoteWhatsApp