Balmerol Protomac Hydraulic Oils in Hyderabad — H Series and HLP Series
Vasundhara Performance Solutions is the authorised Hyderabad supplier for Balmerol Protomac H hydraulic oils — Balmer Lawrie's industrial-hydraulic workhorse range. Protomac H ISO VG 32/46/57/68/81/100 mineral hydraulic oils to DIN 51524 Part 1, IS 10522/1983 (Reaffirmed 2019) and IPSS 1-09-002, tested on the Vickers V-104C vane pump. Where your system specification calls for HLP, the grade to quote is the Protomac HLP Series — DIN 51524 Part 2 (HLP), Denison HF-0 and HF-2, Cincinnati Milacron P-68/P-69/P-70. For PSU industrial hydraulic systems, machine-tool hydraulics, mobile equipment hydraulics, and general plant hydraulic service across India. PSU tender and GeM supply.
Request Protomac H Quote General enquiry Call: +91-9912825442Request a quote
Tell us the grade, pack size and quantity. We quote on working days, usually the same day, with delivered price and lead time.
Quoting for: Balmerol Protomac Hydraulic Oils in Hyderabad
We use these details only to quote and supply. We do not sell or share them. See our Privacy Policy.
Balmerol Protomac H Range
Complete Balmerol Protomac hydraulic oil portfolio — the H Series to DIN 51524 Part 1 and the HLP Series to Part 2, with the OEM approvals Balmer Lawrie publish for each.
Balmerol Protomac H-32 / H-46
ISO VG 32 + 46 mineral hydraulic oils to DIN 51524 Part 1, IS 10522/1983 (Reaffirmed 2019) and IPSS 1-09-002, tested on the Vickers V-104C vane pump. The workhorse Balmerol industrial hydraulic grades for general plant + press-shop service. Where the system specification calls for HLP, quote Protomac HLP instead and we will say so on the quotation.
Balmerol Protomac H-68 / H-100
ISO VG 68 + 100 anti-wear hydraulic oils for high-pressure + high-ambient applications — injection-moulding presses, high-pressure hydraulic systems, mobile equipment in hot climates. Enhanced anti-wear + thermal-stability package.
Balmerol Protomac HLP-32
The lowest grade Balmer Lawrie publish in the Protomac H Series is ISO VG 32; for mobile hydraulics and cold-start service we quote the 32 grade, or Protomac H SPL where a high viscosity index is needed. For excavators, wheel loaders operating in northern India winter conditions.
Balmerol Protomac H 46 (SPL) — High VI
High-viscosity-index variant for applications with wide operating temperature range. Better viscosity stability across cold-start to full-load operation. For outdoor equipment + applications with severe temperature swings.
Balmerol Protomac H Series — PSU Tender Stock
stocked for PSU supply on GeM grades — IOCL, BPCL, HPCL, ONGC, NTPC, SAIL, RINL. GeM-registered + Udyam-compliant documentation. PSU pre-bid documentation pack on enquiry.
Used-Oil Analysis & Drain Planning
Quarterly sample analysis — viscosity drift, water content, particle count (ISO 4406), TAN, wear-metal spectrometry. Extends drain interval 30-50% over manufacturer-default schedules.
Technical Specifications
Standard property values across the range. TDS / MSDS / per-batch COA available on enquiry.
Swipe the table sideways to see all 5 columns →
| Property | Test Method | Protomac H 32 | Protomac H 46 | Protomac H 68 |
|---|---|---|---|---|
| Viscosity at 40°C (cSt) | ASTM D445 | 28.8-35.2 | 41.4-50.6 | 61.2-74.8 |
| Viscosity at 100°C (cSt) | ASTM D445 | ≥5.5 | ≥6.7 | ≥8.5 |
| Viscosity Index | ASTM D2270 | ≥95 | ≥95 | ≥95 |
| Flash Point (°C) | ASTM D92 | ≥200 | ≥210 | ≥220 |
| Pour Point (°C) | ASTM D97 | ≤-21 | ≤-21 | ≤-18 |
| FZG Failure Load Stage | DIN 51354 | ≥10 | ≥10 | ≥10 |
| Vickers V104C Wear (mg) | ASTM D7043 | ≤50 | ≤50 | ≤50 |
| Foam Sequence I (mL) | ASTM D892 | ≤450/0 | ≤450/0 | ≤450/0 |
Standards compliance: Protomac H Series: Vickers V-104C vane pump test · IS 10522/1983 (Reaffirmed 2019) · DIN 51524 Part 1 · IPSS 1-09-002. Protomac HLP Series: DIN 51524 Part 2 (HLP) · Denison HF-0 and HF-2 · Cincinnati Milacron P-68 / P-69 / P-70 · IS 10522-1983 (Reaffirmed 2014) and IS 11656-1986 (Reaffirmed 2018)
Application Areas by Industry
Where Balmerol Protomac H hydraulic oils ship from our Hyderabad warehouse.
PSU Heavy Engineering + Manufacturing
Protomac H 32/46/68 for PSU heavy-engineering hydraulic systems — BHEL, BEML, HMT, defence PSU. Standardised across PSU industrial-hydraulic procurement. GeM-listed supply.
Steel Mill + Refinery Hydraulics
Protomac H 46/68 for SAIL Vizag, RINL, JSW Steel hydraulic systems + refinery hydraulic (IOCL, BPCL, HPCL, ONGC). Large-volume PSU supply contracts.
Press-Shop + Injection Moulding
Protomac H 46/68 for press hydraulics + injection-moulding-press hydraulics — auto-ancillary press shops + plastic-component manufacturers across India.
Machine-Tool Hydraulics
Protomac H 32/46 for CNC machine-tool hydraulics + machining-centre hydraulic axes. Compatible with Mazak / DMG Mori / Doosan / Hyundai WIA OEM specs.
Mobile Equipment Hydraulics
Protomac H 22/32/46 for excavators, wheel loaders, mining haul-truck hydraulic systems. Tata Hitachi, JCB India, Caterpillar India authorised service.
PSU Tender Supply
Vasundhara is a GeM-registered supplier of Balmerol Protomac H across IOCL, BPCL, HPCL, ONGC, NTPC, SAIL, RINL, BHEL, BEML tender programmes.
Why Source Balmerol Protomac H from Vasundhara
Indian-engineered hydraulic oil with strong PSU heritage. Protomac H meets DIN 51524 Part 1 and IS 10522; Protomac HLP carries Part 2 with the Denison and Cincinnati approvals, at competitive PSU-tender pricing.
1. Hyderabad Dispatch in 2 Working Days
Stocked grades ship within 2 working days from Secunderabad warehouse. Specialty / synthetic variants typically 3-5 working days. Pan-India dispatch via authorised transport network.
2. Authorised Distribution Channel
Genuine Balmerol product through manufacturer-authorised supply. Manufacturer authorisation documentation provided on enquiry. Per-batch traceability for warranty + audit-trail compliance.
3. Engineering Application Support
Viscosity selection, drain-interval optimisation, cross-equivalence mapping with competitor brands, contamination-event troubleshooting. Free for projects where Vasundhara is the supply partner.
4. Single-Vendor Lubricant Kit
Bundle Balmerol products with our wider lubricant + grease + speciality-fluid portfolio. One PO, simplified GST reconciliation, single accountable contact for plant-wide supply.
5. Compliance Documentation
Per-batch test certificates (TDS, MSDS, COA), manufacturer authorisation letters, BIS conformance reports where applicable. Suitable for ISO 9001 / IATF 16949 / pharma audits. Pre-shipment sample retention available.
6. Used-Oil Analysis & Monitoring
Periodic sample analysis — viscosity, TAN/TBN, water content, particle count (ISO 4406), wear-metal spectrometry. Optimises drain intervals (typically 20-40% extension over manufacturer defaults) + catches failure modes early.
Pack Sizes & Bulk Supply
Standard packaging across the range. Bulk pricing on volumes >1,000 L.
| Pack Format | Volume | Typical Use Case |
|---|---|---|
| Pail (HDPE) | 20 L | Single-machine top-up, sample-and-trial orders |
| Drum | 50 L | Mid-duty maintenance stock |
| Barrel (steel) | 210 L | Plant maintenance stores standard |
| IBC Tote | 1000 L (1 MT) | Bulk supply for high-volume users |
| Bulk Tanker | 3,000-5,000 L+ | Direct-to-tank delivery, large plants |
Visit Our Office: H.No. 10-2-309, Flat No. 201, Sudha Vaishnavi Residency, Street No. 4, West Marredpally, Secunderabad, Telangana 500026 | View on Google Maps
Frequently Asked Questions
Common questions from PSU + industrial hydraulic buyers sourcing Balmerol Protomac H through Vasundhara.
Is Balmerol Protomac H equivalent to Castrol Hyspin AWS / Veedol AVALON HLP / Servo System?
Yes — at matched ISO VG grade, provided the series matches. Balmer Lawrie publish DIN 51524 Part 2 (HLP), Denison HF-0/HF-2 and Cincinnati Milacron P-68/P-69/P-70 on the Protomac HLP Series; the Protomac H Series is a DIN 51524 Part 1 oil. Tell us which specification your system names and we will quote the series that carries it. Protomac's structural advantage: strong PSU-tender pedigree + competitive PSU rate-contract pricing.
Which Protomac grade for Eaton / Denison / Cincinnati Milacron hydraulic systems?
Protomac HLP 46 is the grade that carries Denison HF-0 and HF-2 and Cincinnati Milacron P-68 / P-69 / P-70; Protomac H 46 is the DIN 51524 Part 1 grade where those approvals are not called for. For systems specifying ISO VG 32 (general industrial), use the 32 grade; for ISO VG 68 (high-pressure press), the 68 grade. Always cross-check the specific OEM service manual + approval list, and tell us which one it names.
How often should Protomac H be sample-analysed?
Quarterly sampling for industrial hydraulic systems. Check: viscosity drift (>±10% from baseline = trigger), water content (>0.1% = trigger), particle count (worse than ISO 20/18/15 = trigger), TAN (doubling from baseline = trigger). Sample-based drain typically extends interval 30-50% over manufacturer-default schedules.
Is Protomac H available for PSU tender supply via GeM?
Yes. Vasundhara is GeM-registered supplier for Balmerol Protomac H. PSU tender response within 2-3 working days including: OEM authorisation letter, type-test certificates, batch traceability, IBR compliance where applicable, GST + PAN documentation. GeM-listed for procurement by IOCL, BPCL, HPCL, ONGC, NTPC, BHEL, BEML programmes.
Do you supply Protomac H in bulk drum + tanker?
Yes. Standard packaging: 200 L drums for general industrial supply, 1,000 L IBC totes for mid-volume PSU sites, bulk tankers (5,000-25,000 L) for large refinery + steel-mill installations. PSU pricing typically rate-contract structured with GeM-published rates.
Is Vasundhara the authorised Balmer Lawrie distributor for South India?
Yes. Vasundhara is the authorised Balmer Lawrie / Balmerol industrial distributor for Hyderabad, Telangana, Andhra Pradesh, Karnataka and South India. Full manufacturer authorisation documentation provided on enquiry.
Related Balmerol Industrial Resources
Complete Balmerol industrial portfolio supplied by Vasundhara.
Ready to Order Balmerol Protomac H Hydraulic Oil?
Tell us your application + ISO VG grade + monthly consumption + PSU tender requirements. We'll respond with rate-contract pricing + GeM-registration documentation within one business day.
Request Quote Call NowRelated: the full Balmerol range from Balmer Lawrie · structural steel and fabrication shops
Running Shell? Our Shell cross-reference page sets out what Shell publish today and which grades carry the same DIN and ISO classifications.Related product lines — Hydraulic & transmission fluids
- Veedol hydraulic oils (ISO VG 32–100)
- GS Caltex Kixx hydraulic oils (HYDRO AW / HD / HVL)
- Balmerol Catmatsu HTX hydraulic oil
- SELCO synthetic hydraulic fluids (PAO / PAG)
- Balmerol Trans Q transmission fluid
- Guide: ISO VG 32 vs 46 vs 68 — which hydraulic oil
Hydraulic oil supplier Hyderabad — all brands, ISO VG 32–100 →