Automatic Grease Lubricators (Single-Point), Supplied to Order
A single-point automatic lubricator screws onto one greasing point and feeds a measured shot of grease at a fixed interval, in place of a grease-gun round. We supply motor-driven units in 60, 150, 250 and 500 ml sizes to order, with the grease to fill them.
How we supply
- Quote on working days, usually the same day, with delivered price and lead time
- GST tax invoice on every order
- Dispatch: stock items within 2 working days; other grades to order, lead time stated on the quote
- Data sheet: the manufacturer’s sheet goes out with the quote
Supplying industrial plants since 2016 · GSTIN 36AAFCV6218F1ZB · Udyam UDYAM-TS-02-0002151 · D-U-N-S 860399487
What we supply
Motor-driven, battery-powered single-point lubricators with a replaceable grease cup. The drive unit is kept; the cup and the battery are the consumables. One unit feeds one greasing point.
Supplied to order. The maker's name, model number and data sheet are on the quotation. Every figure on this page is taken from the maker's catalogue; the maker may change specifications without notice, so the data sheet sent with the quotation is the one that applies.
Request a quote
Send the machine, the bearing designation, the speed and the number of points.
Quoting for: Automatic grease lubricator, to order
Short of time? Get a call back
We call during working hours. Your number is used only for this enquiry.
Buying several items? Send your whole list in one go →
We use these details only to quote and supply. We do not sell or share them. See our Privacy Policy.
Specifications
| Item | As stated in the maker's catalogue |
|---|---|
| Type | Single-point, motor-driven, battery-powered grease lubricator. One unit feeds one point. |
| Grease cup sizes | 60 ml, 150 ml and 250 ml; 500 ml in the smart series |
| Dispensing period | 1 to 12 months, set on DIP switches on the unit |
| Outlet pressure | 75–150 psi (5–10 bar), with output adapted to back pressure |
| Operating temperature | −20 to +60 °C. This is the limit of the drive; the grease must still pump at that temperature. |
| Grease outlet | 1/2" PT male |
| Power | 6 V lithium battery pack; the smart series can also run from an external DC supply |
| Size, height × diameter | 60 ml: 13.9 × 8.9 cm. 150 ml: 16.3 × 8.9 cm. 250 ml: 19.6 × 10.2 cm |
| Blockage warning | The unit monitors the feed and flashes a warning light if the line is blocked, the cup is empty or the battery is low |
| Grease | Maker's pre-filled cups, or an empty cup filled with your own grease |
How much grease each setting gives
| Period set on the unit | 60 ml cup, per month | 150 ml cup, per month | 250 ml cup, per month |
|---|---|---|---|
| 1 month | 60 ml | 150 ml | 250 ml |
| 2 months | 30 ml | 75 ml | 125 ml |
| 3 months | 20 ml | 50 ml | 83.3 ml |
| 4 months | 15 ml | 37.5 ml | 62.5 ml |
| 6 months | 10 ml | 25 ml | 41.7 ml |
| 12 months | 5 ml | 12.5 ml | 20.8 ml |
Each dispensing cycle delivers a fixed shot: 0.167 ml from a 60 ml cup, 0.417 ml from a 150 ml cup and 0.694 ml from a 250 ml cup. The period setting changes how often the shot is given, from every 2 hours on the 1-month setting to every 24 hours on the 12-month setting.
Standard and smart series
| Standard series | Smart series | |
|---|---|---|
| Cup sizes | 60, 150 and 250 ml | 60, 150, 250 and 500 ml |
| Indicator | Warning light on the unit | Three-colour indicator on the drive unit |
| Running with the machine | Runs continuously on the set period | With an external DC supply it starts and stops with the machine, so grease is counted against running hours |
| After a power break | — | Resumes the set programme from memory |
| Pressure warning | Warning light on a blocked feed | Early warning when pressure rises; stops at the 10 bar limit and flashes for 24 hours |
| Monthly grease volume | 5 to 250 ml, by cup and setting | 5 to 1,000 ml |
| Inspection tags | RFID (NFC) version available | RFID (NFC) built in |
The RFID versions carry a tag that a technician scans with an NFC phone on the inspection round, so each point has a record of when it was checked and when the cup was changed. The maker's software plans the rounds and holds the records.
Where they are fitted
The maker lists electric motors, water pumps, conveyors, blowers, air handling units, cooling towers, exhaust fans, air compressors, hoists, agitators and kilns. Pages for the common cases: electric motor bearings, conveyor bearings, crushers and vibrating screens, fans, blowers and pumps.
Hazardous areas and low temperatures
The maker's catalogue shows a UL approval for Class I, Division 2, Groups A, B, C and D hazardous locations and, for the 150 and 250 ml RFID models, an Ex ic IIB T5 Gc certificate. In a hazardous area the grease or oil used must have a flash point above 93 °C. These are the maker's certificates; whether they are accepted on your site is for your safety officer to confirm before fitting.
The −20 °C limit is the mechanical limit of the drive. Whether grease is delivered at low temperature depends on whether that grease still pumps.
Grease and upkeep
The cup can be filled with your own grease, so the grease already approved for the bearing stays in use. We supply it: see industrial greases and the grease compatibility guide before changing grease type.
The grease cup and the battery are replaced together at the end of each cycle. If the warning light flashes, check for a blocked line, an empty cup or a low battery. Use the maker's cups and battery packs; a lithium pack must not be recharged, opened or heated.
For oil instead of grease, the maker says to mount the unit below the lubrication point or fit a check valve at the cup outlet to stop leakage.
What to send for a quotation
For each point send the machine, the bearing designation, the shaft speed, the running hours per day, the ambient temperature and the grease now in use. The grease quantity and interval are then worked out per bearing, and the cup size and period setting follow from that.
Terms
We quote on working days, usually the same day. Lubricators are supplied to order, so the lead time is stated on the quotation. Transit is 48–72 hours in South India and 5–7 days elsewhere after dispatch. Payment is in advance against a proforma invoice, and GeM orders follow GeM terms. Every order carries a GST tax invoice. Prices are on request.
Frequently Asked Questions
What is a single-point automatic lubricator?
A unit that screws onto one greasing point and feeds a measured shot of grease at a fixed interval. The units we supply are motor-driven and battery-powered, with a replaceable grease cup.
What sizes are available?
Grease cups of 60 ml, 150 ml and 250 ml, and 500 ml in the smart series.
How long does one cup last?
The dispensing period is set from 1 to 12 months on DIP switches on the unit. A 150 ml cup on the 6-month setting gives 25 ml a month.
Can I use my own grease?
Yes. The maker offers an empty cup to fill with your own grease, as well as pre-filled cups. We supply the grease.
What pressure does it deliver?
75–150 psi (5–10 bar), as stated in the maker's catalogue.
How do I get a price?
Prices are on request. Send the points and quantities and we quote on working days, usually the same day.
Send your greasing points
Send the machine, the bearing, the speed and the number of points. We quote on working days, usually the same day, with the lead time.
Request a quoteRelated — automatic lubrication
- Automatic lubricators for electric motor bearings
- Automatic lubricators for conveyor bearings
- Automatic lubricators for crushers and vibrating screens
- Automatic lubricators for fans, blowers and pumps
- Guide: when an automatic lubricator is worth fitting
- Industrial grease supplier
- Send your list for a quotation