Automatic Lubricators for Conveyor Bearings
Conveyor bearings are many, spread out and often behind guards or at height. A single-point automatic lubricator on each one feeds grease while the belt runs, and an inspection tag records that the point was checked.
How we supply
- Quote on working days, usually the same day, with delivered price and lead time
- GST tax invoice on every order
- Dispatch: stock items within 2 working days; other grades to order, lead time stated on the quote
- Data sheet: the manufacturer’s sheet goes out with the quote
Supplying industrial plants since 2016 · GSTIN 36AAFCV6218F1ZB · Udyam UDYAM-TS-02-0002151 · D-U-N-S 860399487
Why conveyors suit automatic lubrication
The maker recommends these units for equipment in isolated, scattered, hazardous or hard-to-reach places, and lists conveyors among the machines to fit. The point is greased without stopping the belt or sending a fitter behind the guard.
Supplied to order. The maker's name, model number and data sheet are on the quotation. Every figure on this page is taken from the maker's catalogue; the maker may change specifications without notice, so the data sheet sent with the quotation is the one that applies.
Request a quote
Send the machine, the bearing designation, the speed and the number of points.
Quoting for: Automatic lubricator for conveyor bearings, to order
Short of time? Get a call back
We call during working hours. Your number is used only for this enquiry.
Buying several items? Send your whole list in one go →
We use these details only to quote and supply. We do not sell or share them. See our Privacy Policy.
Knowing every point was checked
With many points on one line, the usual failure is a point that is missed. The RFID versions carry a tag on each point. A technician scans it with an NFC phone on the round, and the maker's software holds the route, the record of each check and the cup-change dates.
Mounting away from the bearing
Where the bearing cannot be reached safely, the unit is mounted at a safe place and connected by a grease line. The outlet pressure is 5–10 bar, and the unit warns if the line blocks. The smart series gives an early warning when pressure starts to rise, and stops at 10 bar.
How much grease each setting gives
| Period set on the unit | 60 ml cup, per month | 150 ml cup, per month | 250 ml cup, per month |
|---|---|---|---|
| 1 month | 60 ml | 150 ml | 250 ml |
| 2 months | 30 ml | 75 ml | 125 ml |
| 3 months | 20 ml | 50 ml | 83.3 ml |
| 4 months | 15 ml | 37.5 ml | 62.5 ml |
| 6 months | 10 ml | 25 ml | 41.7 ml |
| 12 months | 5 ml | 12.5 ml | 20.8 ml |
Each dispensing cycle delivers a fixed shot: 0.167 ml from a 60 ml cup, 0.417 ml from a 150 ml cup and 0.694 ml from a 250 ml cup. The period setting changes how often the shot is given, from every 2 hours on the 1-month setting to every 24 hours on the 12-month setting.
Specifications
| Item | As stated in the maker's catalogue |
|---|---|
| Type | Single-point, motor-driven, battery-powered grease lubricator. One unit feeds one point. |
| Grease cup sizes | 60 ml, 150 ml and 250 ml; 500 ml in the smart series |
| Dispensing period | 1 to 12 months, set on DIP switches on the unit |
| Outlet pressure | 75–150 psi (5–10 bar), with output adapted to back pressure |
| Operating temperature | −20 to +60 °C. This is the limit of the drive; the grease must still pump at that temperature. |
| Grease outlet | 1/2" PT male |
| Power | 6 V lithium battery pack; the smart series can also run from an external DC supply |
| Size, height × diameter | 60 ml: 13.9 × 8.9 cm. 150 ml: 16.3 × 8.9 cm. 250 ml: 19.6 × 10.2 cm |
| Blockage warning | The unit monitors the feed and flashes a warning light if the line is blocked, the cup is empty or the battery is low |
| Grease | Maker's pre-filled cups, or an empty cup filled with your own grease |
Grease and upkeep
The cup can be filled with your own grease, so the grease already approved for the bearing stays in use. We supply it: see industrial greases and the grease compatibility guide before changing grease type.
The grease cup and the battery are replaced together at the end of each cycle. If the warning light flashes, check for a blocked line, an empty cup or a low battery. Use the maker's cups and battery packs; a lithium pack must not be recharged, opened or heated.
What to send for a quotation
For each point send the machine, the bearing designation, the shaft speed, the running hours per day, the ambient temperature and the grease now in use. The grease quantity and interval are then worked out per bearing, and the cup size and period setting follow from that.
For conveyors, add the number of pulleys and drives on each line and whether the points are indoors or outdoors.
Terms
We quote on working days, usually the same day. Lubricators are supplied to order, so the lead time is stated on the quotation. Transit is 48–72 hours in South India and 5–7 days elsewhere after dispatch. Payment is in advance against a proforma invoice, and GeM orders follow GeM terms. Every order carries a GST tax invoice. Prices are on request.
Frequently Asked Questions
Can the unit be mounted away from the bearing?
Yes. It can be connected by a grease line. The outlet pressure is 5–10 bar and the unit warns if the line blocks.
How do we know a point was not missed?
The RFID versions carry a tag on each point. A technician scans it with an NFC phone and the check is recorded.
Is it suitable outdoors?
The maker states an operating range of −20 to +60 °C for the drive. The grease must still pump at the site temperature.
How many units does a conveyor need?
One unit feeds one point, so count the greased bearings on the pulleys and drives.
How do I get a price?
Prices are on request. Send the points and quantities and we quote on working days, usually the same day.
Send your conveyor points
Send the bearings, the speeds and the number of points per line. We quote on working days, usually the same day, with the lead time.
Request a quote