Buying from outside India? We export industrial supplies from India with full documents. Export supply WhatsApp export desk
Skip to main content

Ador Welding Machines — Inverter, MIG, TIG, SAW Equipment Dealer

Ador Champ inverter, Champmig MIG/MAG, Champtig TIG and submerged-arc machines, supplied by an authorised Ador dealer from Secunderabad, with installation and AMC.

Request a quote

Welding in a fabrication shop (representative image)
Representative image

How we supply

  1. Quote on working days, usually the same day, with delivered price and lead time
  2. GST tax invoice on every order
  3. Dispatch: stock items within 2 working days; other grades to order, lead time stated on the quote
  4. Data sheet: the manufacturer’s sheet goes out with the quote

Supplying industrial plants since 2016 · GSTIN 36AAFCV6218F1ZB · Udyam UDYAM-TS-02-0002151 · D-U-N-S 860399487

📦 Stocked grades dispatched within 2 working days
🧾 GST invoice, TDS and MSDS on request
🚚 Hyderabad, Telangana, Andhra Pradesh and pan-India
🤝 GeM & Udyam registered for PSU supply

What this page covers

Vasundhara Performance Solutions (VPS) is an authorised dealer of Ador Welding Ltd, which has made welding products in India since 1951. We supply Ador welding machines from Secunderabad to Telangana and Andhra Pradesh, and elsewhere in India against order. Ador machines are price on request.

Four Ador machine families are covered here: Champ inverter machines for stick (MMA) welding, Champmig MIG/MAG sets, Champtig TIG systems, and submerged-arc (SAW) heads and tractors. Models, ratings and supply voltage for each are as published in Ador's current brochure, which we send with the quotation.

Request a quote

Tell us the process, current and duty you need, and your power supply.

Quoting for: Ador welding machine

Short of time? Get a call back

We call during working hours. Your number is used only for this enquiry.

Buying several items? Send your whole list in one go →

Ask on WhatsApp

We use these details only to quote and supply. We do not sell or share them. See our Privacy Policy.

Champmig 400 and 600 — published figures

These are the two Ador machines whose full specifications we publish. Figures as published by Ador; duty cycles are on Ador's standard 40 °C, 10-minute cycle. Full details are on the Champmig 400 and 600 page.

Champmig 400Champmig 600
ProcessIGBT inverter GMAW (MIG/MAG)IGBT inverter GMAW (MIG/MAG)
Supply415 V +15%/−10%, 3-phase, 50/60 Hz415 V +15%/−10%, 3-phase, 50/60 Hz
Welding current400 A at 60% duty; 310 A at 100% duty600 A at 60% duty; 465 A at 100% duty
Current range50–400 A DC65–600 A
Voltage range16–39 V DC16–45 V
Maximum input12.0 kVA at 100% duty21.5 kVA at 100% duty
Efficiency87% at 100% duty89% at 100% duty
Wire feederFeedlite 40 NEMR-C, 4-rollFeedlite 40 (NEH-RC)
Weight (power source)44 kg approx56 kg

Both are supplied as a system: power source, wire feeder, torch and interconnecting cables. The Champmig 600 comes in two configurations, gas-cooled (600 A) and water-cooled (600 E).

Choosing a machine family

Shielding gas, wire sizes and robot-interface options vary by model and are as stated in Ador's documentation for that model; ask us for the sheet.

Installation and maintenance

We carry out a free site survey, installation and commissioning of the Ador machines we supply, with operator training at commissioning. Annual maintenance contracts cover preventive visits and breakdown response within 48 hours; scope and spares coverage are set out in the contract. Ador spare parts are supplied against Ador part numbers.

How to order

  1. Send the process, typical current and duty, plate thickness and power supply (single-phase or three-phase).
  2. We quote on working days, usually the same day, with the machine, accessories, delivered price, lead time and Ador's data sheet.
  3. Payment is in advance against our proforma invoice; GeM orders are on GeM terms. We are a GeM-registered seller.
  4. Stocked items are dispatched from Secunderabad within 2 working days; other models are supplied to order with the lead time on the quote. Transit is 48–72 hours in South India and 5–7 days elsewhere. Every order carries a GST tax invoice.

Frequently Asked Questions

Which Ador welding machine suits general fabrication?

For repair and light fabrication, a Champ inverter stick machine. For production welding, a Champmig MIG/MAG set. For stainless and aluminium, a Champtig TIG system. For automatic welding of long structural seams, submerged arc. Send your application and we will recommend the model from Ador's brochure.

What is the difference between the Champmig 400 and 600?

Duty. Per Ador's published figures, the Champmig 400 gives 400 A at 60% duty and 310 A continuously; the Champmig 600 gives 600 A at 60% duty and 465 A continuously.

Do you install and commission the machine?

Yes. We do a free site survey, install and commission the Ador machines we supply, and train operators at commissioning.

What does your AMC cover?

Preventive visits and breakdown response within 48 hours. Scope and spares coverage are set out in the contract, and the price depends on machine type and age.

Can you supply against PSU and defence tenders?

Yes. We are a GeM-registered seller and bid on GeM for welding equipment. GeM orders are on GeM terms.

What are the payment terms?

Advance payment against our proforma invoice. GeM orders follow GeM terms.

Get an Ador welding machine quote

Send your application, production volume and power supply. We quote the machine, accessories, installation and AMC together, on working days, usually the same day.

Request a quote

Related — Ador welding and cutting

Export desk on WhatsApp
Request a quoteWhatsApp