Flux-Cored and MIG/MAG Welding Wire from India for Vietnam
We supply flux-cored and solid MIG/MAG welding wire from India to buyers in Vietnam, quoted against the classification, diameter and quantity you specify. Vasundhara Performance Solutions exports on its own entity, with IEC, AD code, RCMC, GST, CIN and D-U-N-S.
Send your enquiry to the export desk
Send the AWS classification, wire diameter, quantity, pack, destination port and Incoterm.
Or contact the export desk directly: +91 73375 78989 (phone and WhatsApp) · export@vasundharaperformance.com · WhatsApp
We use these details only to quote and supply. See our Privacy Policy.
What we supply
We supply flux-cored, metal-cored and solid MIG/MAG welding wire to the buyer's specification and order. We source it in India and ship it with a full export document set. We do not claim to export any particular brand, and we are not any maker's export distributor. The classification you specify decides what we quote.
- Carbon steel, flux-cored: gas-shielded classes under AWS A5.20, such as E71T-1C and E71T-5C, run under the shielding gas the maker's data sheet specifies.
- Low-alloy steel, flux-cored: nickel, chromium-molybdenum and weathering classes under AWS A5.29, such as E81T1-Ni1C, E81T1-B2C and E81T1-W2C.
- Stainless steel, flux-cored: E308LT1-4, E309LT1-4, E316LT1-4, E347T1-4 and E2209T1-4 duplex (AWS A5.22).
- Carbon steel, solid and metal-cored: ER70S-6 and ER70S-G solid wire and E70C-6M metal-cored wire (AWS A5.18).
- Stainless steel, solid: ER308L, ER308LSi, ER316LSi, ER309L and ER2209 (AWS A5.9), among others.
- Aluminium, solid: ER4043 and ER5356 (AWS A5.10).
ER70S-G and other G classes have a composition agreed between maker and buyer, so they are not a straight substitute for ER70S-6; check the data sheet before you switch. Where your project needs a grade whose maker names a classification-society approval on its data sheet, say so at enquiry; we ask the maker for the current certificate before we quote. Low-alloy solid wires, nickel-alloy wires, TIG filler rods and electrodes can go in the same consignment.
How to specify
These six details let us quote firm rather than indicative:
- Classification: the AWS class in full, with suffix (for example E71T-1C, E81T1-Ni1C or ER70S-6), or the EN ISO designation your procedure uses.
- Diameter: the wire diameter in millimetres, for example 1.2 mm, with the quantity for each.
- Quantity: in kilograms per class and diameter.
- Pack: spool or drum, as the maker supplies the grade, with any pallet marks or carton labels you need. The pack is confirmed on the quotation.
- Destination port: your port of discharge in Vietnam.
- Incoterm and payment: EXW, FOB, CFR or CIF; advance TT or LC at sight.
Add any test or documentation requirement from your project specification, such as a test certificate per batch or a classification-society certificate. If you are unsure of the class, tell us the base metal, thickness, welding position and shielding gas, and we suggest a class for you to confirm. Your welding procedure specification always governs.
Commercial terms
| Item | What we offer |
|---|---|
| Incoterms | EXW, FOB, CFR or CIF, as you choose |
| Payment | Advance TT against our pro-forma invoice, or an irrevocable LC at sight. See export payment terms. |
| Documents | Commercial invoice and packing list; certificate of origin, with chamber attestation where required; MSDS/SDS per item; test certificates or COA where applicable; UN-approved packing for any hazard-classified goods |
| Quote turnaround | On working days, usually the same day |
| Price | Quoted per enquiry against your specification and Incoterm |
Shipping to Vietnam
Ports of discharge. We quote to the port you name. The Vietnamese ports listed on our ASEAN export page are Cat Lai (Ho Chi Minh City) and Hai Phong. Name the port at enquiry so that a CFR or CIF price is correct.
Import documents. Documents follow Vietnam's import requirements, as you advise them. Tell us at enquiry which certificate of origin, label wording or test reports your customs broker needs. The preferential ASEAN–India certificate of origin is issued in India before shipment, so ask for it at enquiry; the ASEAN export page explains how this works. Where a requirement is one we cannot meet, we say so at quotation, not after the order.
Storage and packing. Welding wire should stay in its sealed original packing until use, because damp, oxidised wire causes feeding and weld-quality problems. For South-East Asia we ship palletised and shrink-wrapped.
Mixed consignments. Wire can be consolidated with other industrial goods for the same buyer, such as brazing rods, electrodes or cutting fluids.
Contact the export desk
Send the classification, diameters, quantities, port and Incoterm to the export desk: export@vasundharaperformance.com, or phone and WhatsApp +91 73375 78989. How a full export order runs, from enquiry to dispatch, is set out on the industrial export supply page.
Frequently Asked Questions
Do you export a specific brand of welding wire?
No. We supply flux-cored and MIG/MAG wire to the classification and specification you send, sourced in India. We do not claim to export any particular brand, and we are not any maker's export distributor.
Which flux-cored wire classes can you quote for Vietnam?
Carbon-steel classes such as E71T-1C and E71T-5C (AWS A5.20), low-alloy classes such as E81T1-Ni1C and E81T1-B2C (AWS A5.29), and stainless classes such as E308LT1-4, E309LT1-4 and E316LT1-4 (AWS A5.22). Send the full class and diameter and we quote against it.
Can solid MIG wire go in the same shipment as flux-cored wire?
Yes. Solid wires such as ER70S-6, ER308LSi, ER316LSi and ER4043, and TIG filler rods or electrodes, can be consolidated with flux-cored wire for the same buyer.
What documents come with the shipment?
Commercial invoice and packing list, certificate of origin with chamber attestation where required, MSDS/SDS per item, and test certificates or COA where applicable. The preferential ASEAN–India certificate of origin is issued before shipment if you ask for it at enquiry.
What payment terms do you accept?
Advance TT against our pro-forma invoice, or an irrevocable letter of credit at sight. We do not offer credit terms.
Which Incoterms do you quote?
EXW, FOB, CFR or CIF. For CFR and CIF, name your port of discharge, such as Cat Lai (Ho Chi Minh City) or Hai Phong.
Send your welding wire requirement
Classification, diameter, quantity, destination port and Incoterm are enough for us to quote. The export desk replies on working days, usually the same day.
Request a quote