Vasundhara Performance Solutions is the authorised Hyderabad supplier for the SELCO synthetic grease range from Yale Synthlube Industries — the SG series, spanning SG-350 high-temperature (to 300 °C, Teflon and Viton seal compatible), SG-360 PAO lithium-complex with PTFE (−60 to +242 °C), SG-500 ultra-high-temperature PTFE, SG-900 and SG-1600 silicone, SG-450/455/460 moly EP, the SG-1360/1370/1410 high-speed greases, and SG-330 food-grade carrying NSF H1 registration 147065.
Request SELCO Synthetic Grease Quote Call: +91-9912825442Synthetic grease chemistries for demanding service profiles where lithium / calcium / clay-based greases can't deliver — extreme temperature, chemical resistance, vacuum compatibility, or extended-life sealed-bearing service.
NLGI 2 synthetic high-temperature grease rated −32 °C to 300 °C. The manufacturer states compatibility with polymeric rubber seals, Teflon and Viton, which is what makes it usable on sealed high-temperature bearings where a lithium grease would both melt and attack the seal.
SG-900 is a silicone fluid thickened with complex lithium soap, −50 °C to 220 °C. SG-1600 is an ultra-high-temperature silicone grease, −35 °C to 250 °C, used on stenter chain bearings and other low-rpm hot running gear in textile finishing.
Synthetic hydrocarbon (PAO) base with lithium complex soap and PTFE, NLGI 2, rated −60 °C to +242 °C on the manufacturer’s datasheet. The widest single temperature window in the SELCO grease range, and the default where one grease has to cover both cold start and hot running.
SG-450 and SG-455 are multipurpose greases on lithium soap with micronised MoS₂, −40 °C to 260 °C; SG-450 carries the EP claim. SG-460 is a synthetic EP moly grease described as non-melting, −32 °C to 285 °C. For shock-loaded and slow-oscillating bearings.
SG-500 is a PTFE and solid-lubricant grease which the manufacturer states passes the 760 °C pipe-thread anti-seize test. SG-1450 is a non-melting industrial grease to 280 °C used on hot-roll applications up to 5,000 tonnes.
NLGI 2 synthetic food-grade grease, NSF H1 registration number 147065, for bearings on food and beverage processing machinery. Packs: 1 kg, 5 kg, 10 kg and 180 kg. This is the only NSF-registered grease in the SELCO range.
Standard property values across the range. TDS / MSDS / per-batch COA available on enquiry.
| Product | Base / thickener as published | NLGI | Temperature range | Notes |
|---|---|---|---|---|
| SG-350 | Synthetic, high-temperature | 2 | −32 to 300 °C | Compatible with polymeric rubber seals, Teflon and Viton |
| SG-360 | PAO + lithium complex + PTFE | 2 | −60 to +242 °C | Widest range in the SELCO grease line |
| SG-370 | Synthesised hydrocarbon + non-soap thickener | 2 | −35 to 240 °C | Non-soap thickener |
| SG-390 | Lithium complex + PTFE | 2 | to 250 °C | Low-rpm EP, water resistant |
| SG-450 / SG-455 | Lithium soap + micronised MoS₂ | 2 | −40 to 260 °C | SG-450 is the EP grade |
| SG-460 | Synthetic EP moly | 2 | −32 to 285 °C | Non-melting |
| SG-500 | PTFE + solid lubricants | 2 | Ultra-high temperature | Passes the 760 °C pipe-thread anti-seize test |
| SG-900 | Silicone fluid + complex lithium soap | 2 | −50 to 220 °C | — |
| SG-1600 | Silicone, ultra-high temperature | 2 | −35 to 250 °C | Stenter chain bearings, low rpm |
| SG-1410 | Not published | 2 | −50 to 180 °C | Very high rpm — 30,000 rpm class |
| SG-1450 | Non-melting industrial | 2 | to 280 °C | Hot roll, up to 5,000 tonnes |
| SG-330 | Synthetic food grade | 2 | Not published | NSF H1 registration 147065 |
| Figures above are the manufacturer’s own published values. Yale Synthlube does not publish full ASTM D217 / D2265 / D2266 tables on its public product pages, and several of its download links point to the wrong datasheet — we obtain the correct TDS from the manufacturer rather than quote numbers we cannot source. | ||||
Manufacturer documentation supplied with every consignment: TDS, MSDS and per-batch certificate of analysis from Yale Synthlube Industries Private Limited, ISO 9001:2015 certified. NSF H1 registrations: SF-330 lubricant 132479, SG-330 grease 147065, SF-330 aerosol 169740, all under NSF company number H750 and independently verifiable at info.nsf.org. We list only the conformities the manufacturer publishes.
Where SELCO synthetic greases ship from our Hyderabad warehouse — by specialty application profile.
SG-920 silicone vacuum grease, which the manufacturer gives as equivalent to DMSI 450/10, −50 °C to 200 °C. Note that SELCO does not make a PFPE grease — for true high-vacuum or oxygen service we quote a PFPE from a manufacturer that does.
SG-1491 red gel grease — synthetic base fluid with a silicate thickener, dielectric, −20 °C to 250 °C.
SG-1410 for very high rpm duty (the manufacturer cites 30,000 rpm, ring-frame bottom roller bushes), SG-1360 for 10,000 rpm draw-frame top roller end bush bearings, SG-1370 for medium rpm under high load. All rated to −60 °C / −50 °C at the cold end.
SG-500 and SG-1450 for the hottest bearing positions, SG-350 where seal compatibility matters, SG-250 open gear lubricant for unenclosed mating surfaces.
SG-225 wire rope lubricant (QWIK Dry), which the manufacturer states penetrates to the core and dries in three to four minutes, and SG-250 open gear lubricant.
SG-360 as the wide-range default, SG-390 low-rpm EP with lithium complex and PTFE where water is present, SG-370 on a non-soap thickener to 240 °C, SG-440 polyglycol-based where water resistance governs.
For maintenance teams selecting a specialty grease — base oil, thickener, temperature window and speed factor decide bearing life far more than brand does. Tell us the bearing size, speed, temperature and seal material and we will name the SG grade rather than sell you the most expensive one.
Stocked grades ship same-day from Secunderabad warehouse. Specialty / synthetic variants typically 3-5 working days. Pan-India dispatch via authorised transport network.
Genuine SELCO product through manufacturer-authorised supply. Manufacturer authorisation documentation provided on enquiry. Per-batch traceability for warranty + audit-trail compliance.
Viscosity selection, drain-interval optimisation, cross-equivalence mapping with competitor brands, contamination-event troubleshooting. Free for projects where Vasundhara is the supply partner.
Bundle SELCO products with our wider lubricant + grease + speciality-fluid portfolio. One PO, simplified GST reconciliation, single accountable contact for plant-wide supply.
Per-batch test certificates (TDS, MSDS, COA), manufacturer authorisation letters, BIS conformance reports where applicable. Suitable for ISO 9001 / IATF 16949 / pharma audits. Pre-shipment sample retention available.
Periodic sample analysis — viscosity, TAN/TBN, water content, particle count (ISO 4406), wear-metal spectrometry. Optimises drain intervals (typically 20-40% extension over manufacturer defaults) + catches failure modes early.
Standard packaging across the range. Bulk pricing on volumes >1,000 L.
| Pack Format | Volume | Typical Use Case |
|---|---|---|
| Pail (HDPE) | 20 L | Single-machine top-up, sample-and-trial orders |
| Drum | 50 L | Mid-duty maintenance stock |
| Barrel (steel) | 210 L | Plant maintenance stores standard |
| IBC Tote | 1000 L (1 MT) | Bulk supply for high-volume users |
| Bulk Tanker | 3,000-5,000 L+ | Direct-to-tank delivery, large plants |
Visit Our Office: H.No. 10-2-309, Flat No. 201, Sudha Vaishnavi Residency, Street No. 4, West Marredpally, Secunderabad, Telangana 500026 | View on Google Maps
Common questions from semiconductor / electrical / pharma / process buyers sourcing SELCO synthetic greases through Vasundhara.
No. There is no perfluoropolyether grease in the Yale Synthlube range. The nearest chemistries they do make are PTFE-containing greases — SG-500 (PTFE plus solid lubricants), SG-360 (PAO, lithium complex and PTFE) and SG-660 PTFE paste — but PTFE is not PFPE and will not do PFPE duties such as oxygen service or aggressive chemical exposure. Where PFPE is genuinely required we quote it from a manufacturer that makes one.
No. Yale Synthlube does not publish a polyurea grease. SG-370 is described as a synthesised hydrocarbon fluid with a non-soap thickener, which is a different thing, and the rest of the range is on lithium soap, lithium complex or silicate thickeners.
Only SG-330 Synthetic Food Grade Grease, NSF registration 147065, held by Yale Synthlube Industries Private Limited under NSF company number H750. The other two SELCO NSF registrations are for oils, not greases: SF-330 lubricant (132479) and the SF-330 aerosol (169740). Verify all three at info.nsf.org.
SG-500 is the top of the range — a PTFE and solid-lubricant grease which the manufacturer states passes the 760 °C pipe-thread anti-seize test. For continuously running bearings rather than static threads, SG-1450 is rated to 280 °C, SG-460 to 285 °C and SG-350 to 300 °C. Tell us the actual bearing temperature, speed and seal material and we will pick between them.
SG-1410 for the 30,000 rpm class — the manufacturer’s stated application is ring-frame bottom roller bushes — SG-1360 at around 10,000 rpm for draw-frame top roller end bush bearings, and SG-1370 for medium rpm under high load. All three run down to −50 °C or below.
Yes. We supply the SELCO grease range from Yale Synthlube Industries Private Limited across Hyderabad, Telangana and Andhra Pradesh, with TDS, MSDS, NSF registration letters and per-batch COA available on enquiry.
Complete SELCO specialty portfolio supplied by Vasundhara.
Send us your requirement, pack size and quantity — quote returned within 4 hours during business hours.
Request Quote Call NowRelated: the full SELCO specialty range
Chat on WhatsApp