Vasundhara Performance Solutions is the authorised Hyderabad supplier for the SELCO / Synthlube industrial aerosol product range — electrical contact cleaners (CRC-equivalent + flush-clean variants), dry-film PTFE lubricant sprays, multi-purpose penetrating oils (WD-40 equivalents), anti-rust + corrosion-protection sprays, mould-release agents (silicone + non-silicone), zinc-rich primer sprays, copper anti-spatter weld sprays, and specialty industrial spray products. Pan-India dispatch from Secunderabad warehouse.
Request SELCO Aerosol Quote Call: +91-9912825442Complete coverage across the industrial aerosol category — cleaners, lubricants, anti-corrosion, mould releases, and specialty sprays for plant maintenance + production.
Non-residue electrical contact cleaner aerosol — for control-cabinet contact cleaning, switchgear contact-strip maintenance, motor-starter contact cleaning, electrical-relay maintenance. Plastic-safe formulation (no chlorinated solvents that attack plastic insulation). Standard for plant-maintenance + service-engineer kit.
Dry-film PTFE (Teflon) lubricant aerosol — for low-friction surfaces where wet lubricant would attract dust + contamination. Slide rails, conveyor chains in dusty environments, machine-tool slideways supplementary lubrication, tool-shop precision-mechanism lubrication. Wide-temperature range (-50°C to +250°C).
Penetrating oil aerosol — WD-40 / Loctite Bonderite-equivalent multi-purpose spray. For seized fastener loosening, light corrosion removal, water displacement, light lubrication, electrical-equipment moisture removal. The maintenance-shop workhorse for general light-duty applications.
Anti-rust + corrosion-protection spray for short-term storage protection of finished metal parts, in-process protection during paint-shop / plating-shop transit, packing-grade protection for export shipments. Wax-base or oil-base formulations available — wax-base for outdoor / long-term protection, oil-base for indoor / short-term.
Silicone mould-release spray for plastic injection moulding + rubber moulding + tyre manufacturing. Non-silicone mould-release for paint-grade applications where silicone would interfere with downstream painting. Industrial PTFE-base mould-release for high-temperature moulding service.
Anti-spatter weld spray (water-base + oil-base) to prevent weld-spatter adhesion to weld-shop surfaces, weld-tip dip / nozzle-cleaner gel for MIG welding tip maintenance, copper-weld-shop temperature paint indicators (Tempil-equivalent). Specialty spray products for specific industrial needs.
Standard property values across the range. TDS / MSDS / per-batch COA available on enquiry.
| Property | Test Method | Contact Cleaner | PTFE Dry-Film | Penetrant | Anti-Rust |
|---|---|---|---|---|---|
| Form / Application | — | Aerosol spray | Aerosol spray | Aerosol spray | Aerosol spray |
| Drying / Cure Time | — | <1 minute | 5-10 minutes | Persists wet | 5-15 minutes |
| Plastic Compatibility | — | Yes | Yes | Limited | Yes |
| Operating Temp Range (°C) | — | -30 to +60 (during use) | -50 to +250 (after dry) | -30 to +120 | -30 to +80 |
| Flash Point (°C) | — | -20 to 0 (flammable) | -20 to 0 (flammable) | >40 (low-flam) | -10 to +10 |
| Residue Type | — | Non-residue | PTFE film | Light oil film | Wax / oil film |
| Pack Size (typical) | — | 500 ml | 400 ml | 400 ml | 400 ml |
| Shelf Life | — | 24 months | 24 months | 24 months | 24 months |
Standards compliance: BIS conformance where applicable · MIL-PRF (military aerosol product specifications where applicable) · OSHA aerosol-product handling guidelines · IATA Dangerous-Goods classification for transport · NSF H1 (food-grade aerosol variants where available)
Where SELCO Synthlube industrial aerosols ship from our Hyderabad warehouse — by maintenance activity and industry segment.
Contact cleaner aerosols for control-cabinet contact cleaning, switchgear contact-strip maintenance, motor-starter contact-cleaning service, electrical-relay maintenance. Standard for plant electrical maintenance teams across cement, steel, pharma, food-processing facilities.
Dry-film PTFE lubricant + penetrating oil aerosols for assembly-line conveyor + pneumatic-cylinder maintenance, conveyor-roller bearing supplementary lubrication, fixture-clamping mechanism maintenance. Auto-ancillary, auto-component, electronics-assembly plants are common buyers.
Penetrating oil + anti-rust + dry-film PTFE aerosols for tool-room precision maintenance, machine-tool service, fixture-storage anti-corrosion protection. Mould-shop + tool-shop mould-release spray for moulding equipment service.
Anti-spatter weld spray + welding-tip / nozzle cleaner aerosols for MIG / TIG welding shop service. Pairs with our Ador welding equipment + electrode supply portfolio.
Pre-paint cleaning aerosols (degreasers, contact cleaners), masking-aid aerosols, post-paint anti-rust over-spray protection. Auto-ancillary paint shops, white-goods paint-line maintenance, exhibition-display production paint-shop maintenance.
Penetrating oil + multi-purpose spray + anti-rust for outdoor field-service maintenance — telecom tower hardware, outdoor electrical-equipment maintenance, agricultural equipment service, mobile field-service technician kit.
For plant maintenance heads + service-engineer kit purchasing — choosing the right industrial aerosol products supports day-to-day maintenance reliability + reduces equipment-downtime incidents.
Stocked grades ship same-day from Secunderabad warehouse. Specialty / synthetic variants typically 3-5 working days. Pan-India dispatch via authorised transport network.
Genuine SELCO Synthlube product through manufacturer-authorised supply. Manufacturer authorisation documentation provided on enquiry. Per-batch traceability for warranty + audit-trail compliance.
Viscosity selection, drain-interval optimisation, cross-equivalence mapping with competitor brands, contamination-event troubleshooting. Free for projects where Vasundhara is the supply partner.
Bundle SELCO Synthlube products with our wider lubricant + grease + speciality-fluid portfolio. One PO, simplified GST reconciliation, single accountable contact for plant-wide supply.
Per-batch test certificates (TDS, MSDS, COA), manufacturer authorisation letters, BIS conformance reports where applicable. Suitable for ISO 9001 / IATF 16949 / pharma audits. Pre-shipment sample retention available.
Periodic sample analysis — viscosity, TAN/TBN, water content, particle count (ISO 4406), wear-metal spectrometry. Optimises drain intervals (typically 20-40% extension over manufacturer defaults) + catches failure modes early.
Standard packaging across the range. Bulk pricing on volumes >1,000 L.
| Pack Format | Volume | Typical Use Case |
|---|---|---|
| Pail (HDPE) | 20 L | Single-machine top-up, sample-and-trial orders |
| Drum | 50 L | Mid-duty maintenance stock |
| Barrel (steel) | 210 L | Plant maintenance stores standard |
| IBC Tote | 1000 L (1 MT) | Bulk supply for high-volume users |
| Bulk Tanker | 3,000-5,000 L+ | Direct-to-tank delivery, large plants |
Visit Our Office: H.No. 10-2-309, Flat No. 201, Sudha Vaishnavi Residency, Street No. 4, West Marredpally, Secunderabad, Telangana 500026 | View on Google Maps
Common questions from plant maintenance + service-engineering buyers sourcing SELCO Synthlube industrial aerosols through Vasundhara.
SELCO's standard electrical contact cleaner aerosol is non-conductive + plastic-safe + fast-drying — the typical safe-for-energised-equipment formulation for control-cabinet maintenance + switchgear contact cleaning where de-energising is impractical. However: always verify with the specific equipment OEM's maintenance manual + your plant's electrical-safety procedures before applying any contact cleaner on energised equipment. For critical safety-margin, prefer de-energising the equipment + using LOTO procedure during contact cleaning.
Yes — dry-film PTFE lubricant is the preferred choice for slide rails / conveyor chains / machine-tool slideways in dusty environments. Wet lubricant attracts + retains dust, forming an abrasive paste that accelerates wear. Dry-film PTFE provides low-friction surface coating without dust-retention behaviour. Re-application typically every 1-3 months depending on duty cycle. For wet-lubrication-required applications (high-load contact pressures), continue with the appropriate slideway / chain lubricant.
SELCO has both standard silicone mould-release (NOT food-grade) and NSF H1-registered food-grade mould-release variants. For food-and-beverage moulding applications (food-grade plastic packaging, food-contact rubber gaskets, food-processing equipment moulds), specify the NSF H1-registered food-grade mould-release. Standard silicone + non-silicone mould-release variants are for industrial-grade moulding applications without food-contact requirements.
Storage: ambient temperature (max 50°C), away from direct sunlight + heat sources, in a ventilated area away from ignition sources. Most aerosols carry IATA Dangerous-Goods classification 2.1 (flammable gas) or 2.2 (non-flammable compressed gas) for transport. Disposal: empty cans should be discharged to atmospheric pressure (puncture in ventilated area) before disposal as scrap metal. Partially-full cans should be disposed via hazardous-waste collection — do NOT mix with general industrial waste. Vasundhara provides supplier-take-back service for empty / partial cans on request.
Yes — most industrial aerosols carry 24-month manufacturer-stamped shelf life from manufacturing date. Older aerosols may have: (1) propellant gas leakage causing reduced spray pressure, (2) carrier separation requiring shake-before-use, (3) chemistry degradation in some formulations. Best practice: use first-in-first-out stock rotation, check manufacturing date on the can, dispose of clearly-expired stock via hazardous-waste route. Vasundhara stocks recent-manufacture inventory + cycles stock to minimise customer exposure to near-expiry product.
Standard packaging: 400 ml + 500 ml aerosol cans for the typical industrial-aerosol product range. Bulk pack of 12 cans / case for plant maintenance store standard. Some specialty products (mould releases, anti-rust) available in 1 L cans + 5 L pour-on packs for high-volume application. PSU buyers can specify per their stores standard via the GeM rate contract.
Yes. Vasundhara is GeM-registered seller. SELCO Synthlube industrial aerosols (contact cleaners, dry-film lubes, penetrants, anti-rust, mould releases, weld sprays) available under standing rate contract for PSU buyers — Indian Railways workshops, BHEL plants, defence establishments, central-PSU manufacturing facilities. Documentation pack includes Udyam-MSME registration + manufacturer authorisation.
Yes. Vasundhara Performance Solutions Pvt Ltd is the authorised SELCO / Synthlube specialty lubricant distributor for Hyderabad, Telangana and Andhra Pradesh. We supply genuine SELCO industrial aerosols, with full manufacturer authorisation documentation provided on enquiry. For our complete SELCO portfolio, see our SELCO brand page.
Complete SELCO specialty portfolio supplied by Vasundhara.
Send us your requirement, pack size and quantity — quote returned within 4 hours during business hours.
Request Quote Call Now