Vasundhara Performance Solutions is the authorised Hyderabad supplier for the SELCO / Synthlube anti-seize compound range — copper-base anti-seize for general industrial high-temperature service, nickel-base for stainless-steel + corrosive-environment threads, ceramic-base (metal-free) for nuclear / oxygen-service / electrical-resistance applications, and NSF H1-registered food-grade anti-seize for food-and-beverage process plant. Operating temperature ranges from -30°C up to +1100°C (ceramic). For threaded fasteners on hot-zone equipment, exhaust-system bolts, kiln + furnace fasteners, valve stems, and any application where thread galling / seizure prevention matters. Pan-India dispatch from Secunderabad warehouse.
Request SELCO Anti-Seize Quote Call: +91-9912825442Anti-seize compound chemistries for every application — copper, nickel, ceramic, aluminium, food-grade. Choose based on operating temperature + electrochemical environment + material compatibility.
Copper-base anti-seize compound — copper flake + graphite + petroleum grease carrier. Operating range -30°C to +1100°C (peak). For general industrial high-temperature threaded fasteners — exhaust-system bolts, hot-zone equipment, kiln-area fasteners. Most cost-economic anti-seize for general industrial use. AVOID on stainless-steel threads (galvanic corrosion risk in marine / chemical environments).
Nickel-base anti-seize compound — nickel flake + graphite carrier. Operating range -30°C to +1400°C (peak). For stainless-steel threads, marine / chemical environments where copper anti-seize causes galvanic corrosion. Stainless-steel valve stems, marine engine threads, refinery / petrochemical hot-zone fasteners, food-processing stainless-steel equipment threads. Premium pricing over copper.
Ceramic-base anti-seize — boron nitride + alumina carrier (no metal flakes). Operating range -50°C to +1500°C. For nuclear-service threads (no metal-radiation interaction), oxygen-service threads (no metal-ignition risk), electrical-isolation threaded connections (no metal conductivity). Metal-free formulation matters for these specific applications. Premium pricing.
Aluminium-base anti-seize for high-temperature service on aluminium-alloy threads. Compatible with aluminium-aircraft / aerospace / automotive aluminium engine + cylinder-head fasteners. Operating range -30°C to +900°C. For applications where copper / nickel galvanic interaction with aluminium would cause corrosion.
Food-grade anti-seize compound NSF H1-registered for incidental food contact — calcium-sulfonate or PTFE-base formulation, no heavy-metals. For food-and-beverage process plant threaded fasteners, dairy-equipment threads, beverage-bottling-line equipment threads, pharma stainless-steel equipment threads. Pairs with our pharma cleanroom portfolio.
Specialty thread sealants (PTFE thread sealing tape replacement, anaerobic thread sealants) + thread-locking compounds for applications where anti-seize alone isn't sufficient — pneumatic / hydraulic threaded fittings + pipe-thread connections. Loctite-equivalent product range supplied through SELCO.
Standard property values across the range. TDS / MSDS / per-batch COA available on enquiry.
| Property | Test Method | Copper | Nickel | Ceramic | Food-Grade NSF H1 |
|---|---|---|---|---|---|
| Operating Temperature Range (°C) | — | -30 to +1100 | -30 to +1400 | -50 to +1500 | -30 to +260 |
| Friction Coefficient (typical) | — | 0.10-0.13 | 0.12-0.15 | 0.10-0.13 | 0.12-0.15 |
| Metal Flake Content (% wt) | — | Cu 30-40% | Ni 20-30% | 0 (metal-free) | 0 (metal-free) |
| Carrier (Grease Base) | — | Petroleum + Graphite | Petroleum + Graphite | Boron Nitride / Alumina | Calcium Sulfonate / PTFE |
| Galvanic Corrosion (SS threads) | — | Risk in marine/chem | Compatible | Compatible | Compatible |
| NSF H1 Food-Grade Registration | — | No | No | No | Yes |
| Nuclear-Service Suitable | — | No | Limited | Yes | No |
| Oxygen-Service Suitable | — | No | No | Yes | Limited |
| Cost Index (relative to copper) | — | 1× | 2-3× | 5-10× | 3-5× |
Standards compliance: MIL-PRF-907 (anti-seize compounds) · ASTM F2329 (anti-seize torque-tension behaviour) · ASME B16.34 (valve stem service) · NSF H1 (food-grade variants) · IS 6911 (industrial fastener compounds) · MIL-A-907 (military anti-seize)
Where SELCO Synthlube anti-seize compounds ship from our Hyderabad warehouse — by application and material profile.
Copper anti-seize for cement plant kiln-shell bolts, kiln-feed-housing fasteners, preheater cyclone bolts, raw-mill bolt service. High-temperature (up to 1100°C peak) + cost-economic for the high-volume fastener service typical in cement plants. Pairs with our cement plant lubricants portfolio.
Nickel anti-seize for hot-strip mill stainless-steel bolts, continuous casting machine threaded service, ladle-turret bolt service, slab-mill stainless-fastener service. Copper anti-seize for non-stainless hot-zone bolts. Customers across SAIL, RINL, JSW, Tata Steel.
Nickel anti-seize for stainless-steel valve stems, refinery / petrochemical hot-zone fasteners (high-temperature service + corrosive environment). Copper anti-seize where appropriate for non-stainless service. HPCL Visakhapatnam Refinery, ONGC Tatipaka, Nagarjuna Fertilisers, RCF / GSFC fertiliser plants are common customers.
NSF H1-registered food-grade anti-seize for pharma + food-and-beverage process plant stainless-steel equipment threads. Critical for compliance audit (FDA, WHO-GMP, FSSAI, HACCP). Genome Valley, Bachupally, Jeedimetla pharma cluster + food-processing plants are common customers. Pairs with our pharma cleanroom.
Ceramic anti-seize for nuclear-service applications (DAE, BARC, defence research labs), oxygen-service applications (industrial gas plants, aerospace test stands), electrical-isolation threaded connections (substation hardware). Specialty mil-spec / aerospace-spec compliance documentation.
Nickel anti-seize for stainless-steel marine fasteners — ship deck equipment threads, ship-engine stainless bolts, offshore-platform threaded service. Cochin Shipyard, Garden Reach, Mazagon Dock, port + offshore-equipment maintenance customers.
For maintenance teams selecting anti-seize compound — chemistry choice (copper vs nickel vs ceramic vs food-grade) shapes thread service life, galvanic-corrosion behaviour, and audit-compliance status.
Stocked grades ship same-day from Secunderabad warehouse. Specialty / synthetic variants typically 3-5 working days. Pan-India dispatch via authorised transport network.
Genuine SELCO Synthlube product through manufacturer-authorised supply. Manufacturer authorisation documentation provided on enquiry. Per-batch traceability for warranty + audit-trail compliance.
Viscosity selection, drain-interval optimisation, cross-equivalence mapping with competitor brands, contamination-event troubleshooting. Free for projects where Vasundhara is the supply partner.
Bundle SELCO Synthlube products with our wider lubricant + grease + speciality-fluid portfolio. One PO, simplified GST reconciliation, single accountable contact for plant-wide supply.
Per-batch test certificates (TDS, MSDS, COA), manufacturer authorisation letters, BIS conformance reports where applicable. Suitable for ISO 9001 / IATF 16949 / pharma audits. Pre-shipment sample retention available.
Periodic sample analysis — viscosity, TAN/TBN, water content, particle count (ISO 4406), wear-metal spectrometry. Optimises drain intervals (typically 20-40% extension over manufacturer defaults) + catches failure modes early.
Standard packaging across the range. Bulk pricing on volumes >1,000 L.
| Pack Format | Volume | Typical Use Case |
|---|---|---|
| Pail (HDPE) | 20 L | Single-machine top-up, sample-and-trial orders |
| Drum | 50 L | Mid-duty maintenance stock |
| Barrel (steel) | 210 L | Plant maintenance stores standard |
| IBC Tote | 1000 L (1 MT) | Bulk supply for high-volume users |
| Bulk Tanker | 3,000-5,000 L+ | Direct-to-tank delivery, large plants |
Visit Our Office: H.No. 10-2-309, Flat No. 201, Sudha Vaishnavi Residency, Street No. 4, West Marredpally, Secunderabad, Telangana 500026 | View on Google Maps
Common questions from refinery, pharma, food and industrial maintenance buyers sourcing SELCO anti-seize compounds through Vasundhara.
Copper anti-seize (most common, cost-economic): use on carbon steel, alloy steel, cast iron threads in non-corrosive industrial environments. Operating temperature up to 1100°C peak. AVOID on stainless steel threads in marine / chemical / wet environments — copper-stainless galvanic couple can accelerate corrosion. Nickel anti-seize: use on stainless steel, nickel alloys, in marine / chemical / corrosive environments. Operating temperature up to 1400°C peak. Premium pricing (2-3× copper). For hot-zone industrial service on stainless threads, nickel is the right choice.
Yes — in marine / chemical / wet electrochemical environments, copper-on-stainless-steel forms a galvanic couple that can accelerate corrosion of the less-noble metal. For stainless threads in dry / mild atmospheric environments, the risk is low. For critical service (refinery valve stems, marine equipment, food-processing stainless equipment), use nickel anti-seize instead — nickel is closer to stainless on the galvanic series. In aggressive environments, ceramic anti-seize eliminates the galvanic risk entirely.
Yes — nuclear-service applications (reactor-component fasteners, instrument-rod threads, BARC / DAE research-reactor components) typically specify metal-free ceramic anti-seize. Reasons: (1) no metal-radiation interaction (copper / nickel can become activated in neutron flux), (2) no metal-corrosion-product contamination of reactor coolant, (3) no metal-flake spread to sensitive instrumentation. Premium pricing (5-10× copper) is justified by the criticality of nuclear-service compliance.
Yes. SELCO's food-grade anti-seize compound carries NSF H1 registration for incidental food contact applications — suitable for food-and-beverage process plant + pharma stainless-steel equipment threads where occasional food/product contact is part of the operating profile. Calcium-sulfonate or PTFE-base formulation, no heavy-metal flakes. Critical for FDA / WHO-GMP / FSSAI / HACCP compliance audit. NSF H1 registration documentation provided on enquiry.
Standard practice: apply a thin film covering all threaded surfaces (including the underside of bolt heads / nut faces). Avoid over-application — excess compound can squeeze into critical clearances + cause torque-control variations. Typical consumption: ~5g per M16 bolt (full thread coverage). For high-volume installations (e.g., cement plant kiln-shell bolt service), brush-on application from a 1 kg bottle is standard. Application instructions vary slightly across copper / nickel / ceramic chemistries — refer to the specific product TDS.
Yes — SELCO anti-seize compounds are designed for installation at ambient + warm temperatures (typically up to 60-80°C). For installation at very high temperatures (>100°C), the petroleum carrier may flash off rapidly — consider pre-cooling the assembly or using a pre-applied thick coating. The functional anti-seize behaviour (preventing thread galling / seizure) requires the metal flakes / ceramic particles to remain in place after the carrier evaporates during high-temperature service — which is why even after carrier evaporation, the threads remain protected and disassemble cleanly.
Yes. Vasundhara is GeM-registered seller. SELCO Synthlube anti-seize compounds (copper, nickel, ceramic, food-grade NSF H1) available under standing rate contract for PSU buyers — refineries (HPCL, BPCL, IOCL), fertiliser plants (RCF, GSFC, NFL, ONGC), defence establishments, nuclear-service applications (DAE, BARC), Indian Railways workshop fastener service. Documentation pack includes Udyam-MSME registration + manufacturer authorisation.
Yes. Vasundhara Performance Solutions Pvt Ltd is the authorised SELCO / Synthlube specialty lubricant distributor for Hyderabad, Telangana and Andhra Pradesh. We supply genuine SELCO anti-seize compounds, with full manufacturer authorisation documentation provided on enquiry. For our complete SELCO portfolio, see our SELCO brand page.
Complete SELCO specialty portfolio supplied by Vasundhara.
Send us your requirement, pack size and quantity — quote returned within 4 hours during business hours.
Request Quote Call Now