Vasundhara Performance Solutions is the authorised Hyderabad supplier for the SELCO / Synthlube textile yarn compound range — spinning oils for cotton + polyester + viscose + blended yarn manufacturing, coning oils + warping lubricants for warp preparation, knitting oils for knitted-fabric production, weaving / loom lubricants, finishing emulsions, and de-sizing chemicals. For textile mills, spinning units, garment-export production lines, technical-textile manufacturers across Telangana, Andhra Pradesh, Tamil Nadu, Maharashtra, and pan-India textile clusters. Pan-India dispatch from Secunderabad warehouse.
Request SELCO Textile Yarn Quote Call: +91-9912825442Complete coverage across the textile yarn manufacturing process — from spinning through coning, warping, knitting, weaving, and finishing.
Spinning oil for cotton yarn manufacturing — emulsifiable mineral oil with anti-static + anti-bacterial additive package. Applied at the carding / drawing / roving / ring-frame stage to control fibre-to-fibre + fibre-to-metal friction. Critical for yarn evenness + reduced breakage rates. Available in different concentrations for short-staple + long-staple cotton variants.
Spinning oil for polyester + viscose + acrylic + nylon synthetic yarn manufacturing. Higher emulsifier content + anti-static additive (synthetic fibres are more electrostatic-prone). Compatible with continuous filament + staple-fibre production. For texturising machine yarn-prep + spinning operations.
Coning oil applied during the cone-winding stage to lubricate the yarn surface for downstream warping + weaving operations. Reduces yarn-to-yarn + yarn-to-machine friction. Critical for warp-yarn breakage reduction during warping + weaving. Mineral-base or synthetic-base variants depending on yarn type + downstream process.
Knitting machine lubricant for circular knit + flat-bed knit + warp-knit machines. Stains-out on washing — important for white / light-coloured fabric production. Plastic + stainless-steel compatible (no degradation of needle-bed plastic guides). Common spec for tier-1 garment-export production lines.
Loom lubricant for shuttleless weaving (rapier, projectile, air-jet, water-jet looms) + traditional shuttle looms. Loom mechanism lubrication + yarn-friction-control during shed formation + pick insertion. Premium grades for high-speed (1500+ ppm) modern looms.
Finishing-stage emulsion for fabric softening, hand-feel improvement, anti-static treatment of finished fabric. De-sizing chemical formulations for sizing-removal during preparation for dyeing / finishing. Specialty chemistries per customer mill specification.
Standard property values across the range. TDS / MSDS / per-batch COA available on enquiry.
| Property | Test Method | Cotton Spin | Polyester Spin | Coning Oil | Knitting Oil |
|---|---|---|---|---|---|
| Type | — | Mineral emulsion | Mineral + emulsifier | Mineral / synthetic | Mineral / synthetic |
| Application Stage | — | Carding to ring-frame | Texturising / spinning | Cone-winding | Knitting machine |
| Recommended Concentration (% on fibre) | — | 0.5-1.0 | 0.8-1.2 | 0.3-0.6 | Direct application |
| Anti-Static Property | — | Moderate | High | Moderate | Moderate |
| Stains-out on Washing | — | Yes | Yes | Yes | Yes |
| Plastic-Compatibility (machine guides) | — | Yes | Yes | Yes | Yes |
| pH (in-use) | — | 5.5-7.0 | 5.5-7.0 | 5.5-7.0 | 5.5-7.0 |
| Operator Skin-Friendly | — | Yes (low-sensitiser) | Yes | Yes | Yes |
Standards compliance: IS / ASTM textile-lubricant specifications · ISO 105 (colour-fastness compatibility) · OEKO-TEX 100 compliance for downstream-fabric applications · OEKO-TEX 1000 + REACH compliance for export-grade applications · Manufacturer specifications per textile mill
Where SELCO Synthlube textile yarn compounds ship from our Hyderabad warehouse — by textile manufacturing process stage.
Cotton spinning oil for short-staple + long-staple cotton yarn manufacturing — Telangana, AP, Karnataka, TN cotton-yarn cluster mills. Carding / drawing / roving / ring-frame application. Critical for yarn-evenness + breakage-reduction in cotton spinning units.
Synthetic spinning oil for polyester staple, polyester filament, viscose, nylon, acrylic spinning + texturising operations. Major textile-fibre cluster mills in Maharashtra (Mumbai, Surat region) + Tamil Nadu (Coimbatore, Tirupur). Higher anti-static additive level required vs cotton.
Coning + knitting oils + finishing emulsions for tier-1 garment-export production. Tirupur knitwear cluster, Chennai / Bangalore garment-export hubs. OEKO-TEX 100 / 1000 + REACH compliance critical for European + US export-grade fabrics.
Specialty yarn compounds for technical-textile manufacturing — geo-textiles, automotive textiles, medical textiles, industrial filtration textiles. Customer-specific chemistry requirements + downstream-process compatibility verification.
Loom lubricants for shuttleless (rapier / projectile / air-jet / water-jet) + traditional shuttle looms. Major weaving clusters in Bhiwandi (Mumbai), Surat (Gujarat), Erode + Kanchipuram (Tamil Nadu).
Finishing emulsions + de-sizing chemicals for fabric finishing operations — fabric softening, hand-feel improvement, anti-static treatment. Sizing-removal during preparation for dyeing + finishing operations.
For textile mill quality + production heads selecting yarn compounds — fibre compatibility, downstream process compatibility, OEKO-TEX / REACH compliance, and consistent batch-to-batch performance shape yarn quality + breakage rates + finished-fabric quality.
Stocked grades ship same-day from Secunderabad warehouse. Specialty / synthetic variants typically 3-5 working days. Pan-India dispatch via authorised transport network.
Genuine SELCO Synthlube product through manufacturer-authorised supply. Manufacturer authorisation documentation provided on enquiry. Per-batch traceability for warranty + audit-trail compliance.
Viscosity selection, drain-interval optimisation, cross-equivalence mapping with competitor brands, contamination-event troubleshooting. Free for projects where Vasundhara is the supply partner.
Bundle SELCO Synthlube products with our wider lubricant + grease + speciality-fluid portfolio. One PO, simplified GST reconciliation, single accountable contact for plant-wide supply.
Per-batch test certificates (TDS, MSDS, COA), manufacturer authorisation letters, BIS conformance reports where applicable. Suitable for ISO 9001 / IATF 16949 / pharma audits. Pre-shipment sample retention available.
Periodic sample analysis — viscosity, TAN/TBN, water content, particle count (ISO 4406), wear-metal spectrometry. Optimises drain intervals (typically 20-40% extension over manufacturer defaults) + catches failure modes early.
Standard packaging across the range. Bulk pricing on volumes >1,000 L.
| Pack Format | Volume | Typical Use Case |
|---|---|---|
| Pail (HDPE) | 20 L | Single-machine top-up, sample-and-trial orders |
| Drum | 50 L | Mid-duty maintenance stock |
| Barrel (steel) | 210 L | Plant maintenance stores standard |
| IBC Tote | 1000 L (1 MT) | Bulk supply for high-volume users |
| Bulk Tanker | 3,000-5,000 L+ | Direct-to-tank delivery, large plants |
Visit Our Office: H.No. 10-2-309, Flat No. 201, Sudha Vaishnavi Residency, Street No. 4, West Marredpally, Secunderabad, Telangana 500026 | View on Google Maps
Common questions from textile mill + garment-export buyers sourcing SELCO Synthlube textile yarn compounds through Vasundhara.
Cotton spinning oil is formulated for natural cellulose fibres — emulsifier package + anti-static additive optimised for cotton's moderate electrostatic behaviour. Synthetic spinning oil has higher emulsifier + anti-static content — synthetic fibres (polyester, nylon, acrylic) are more electrostatic-prone + require higher anti-static additive level. For blended yarns (e.g., poly-cotton 65/35), use a balanced spinning oil designed for the blend ratio. Always confirm fibre type + blend ratio + downstream process requirements with the specific yarn-compound supplier.
Yes — SELCO's textile yarn compound range is formulated to support OEKO-TEX 100 + OEKO-TEX 1000 + REACH compliance requirements for European + US export-grade fabric applications. No banned-substance content (formaldehyde, AOX, heavy metals) per the OEKO-TEX restricted-substance list. Per-batch compliance documentation provided on enquiry. Critical for tier-1 garment-export production lines + Eu / US export markets.
SELCO knitting oils are formulated as 'stains-out on washing' compounds — designed to fully wash out during fabric finishing without leaving residual staining on white / light-coloured fabrics. Verify wash-out behaviour with the specific fabric + dye + finishing process at customer facility before bulk supply commitment. Particularly important for premium-grade white / pastel-coloured knitwear export production where any residual oil staining would be a quality-rejection cause.
SELCO has both mineral-base (cost-economic for general spinning service) and synthetic-base (premium for high-end + export-grade applications) yarn compound variants. Synthetic-base offers improved anti-static performance + better wash-out behaviour + lower environmental impact (biodegradable variants available). Mineral-base remains the cost-economic standard for tier-2 / tier-3 mill operations. Selection depends on application + downstream-fabric quality requirements.
Standard spinning-oil application: 0.5-1.0% on fibre (OWF — on weight of fibre) for cotton yarn spinning, applied at the appropriate process stage (carding / drawing / roving / ring-frame depending on mill practice). For polyester / synthetic spinning: 0.8-1.2% OWF. For specialty / premium-yarn applications: customer-specific concentration based on internal mill-quality optimisation. Always verify with SELCO's technical literature for the specific spinning-oil grade + fibre type.
Yes — standard packaging includes 50 L drums + 200 L barrels for medium-volume textile mill stock + 1000 L IBC totes for high-volume bulk supply to large textile mills + spinning units. Bulk-tanker delivery (5,000-10,000 L+) for the largest spinning-mill operations + integrated textile facilities. Per-shipment quality documentation provided per IS / OEKO-TEX / REACH specifications.
Yes. Vasundhara is GeM-registered seller. SELCO Synthlube textile yarn compounds available under standing rate contract for PSU textile-related buyers — National Textile Corporation (NTC) mills, state textile corporation mills, defence-textile manufacturing units, Indian Railways uniform-fabric production. Documentation pack includes Udyam-MSME registration + manufacturer authorisation.
Yes. Vasundhara Performance Solutions Pvt Ltd is the authorised SELCO / Synthlube specialty lubricant distributor for Hyderabad, Telangana and Andhra Pradesh — including textile yarn compound supply for cotton, polyester, viscose, blended yarn manufacturing + downstream knitting, weaving, finishing operations. Genuine SELCO products with full manufacturer authorisation documentation. For our complete SELCO portfolio, see our SELCO brand page.
Complete SELCO specialty portfolio supplied by Vasundhara.
Send us your requirement, pack size and quantity — quote returned within 4 hours during business hours.
Request Quote Call Now