Vasundhara Performance Solutions is the authorised Hyderabad supplier for the HD Fire Protect foam-pourer + foam-system equipment range — Type II top-pourer foam chambers, sub-surface bottom-injection foam systems, foam-water sprinklers, foam-water deluge sprinklers, foam-makers (eductor + venturi types), foam concentrate proportioners (balanced-pressure + bladder-tank systems), foam-storage tanks + bladder tanks, and complete tank-rim foam protection installations. UL Listed / FM Approved / TAC Approved / IS 884 / IS 12835 compliant. For petroleum tank-rim foam protection + LPG / propane storage protection + aircraft hangar foam systems. Pan-India dispatch from Secunderabad warehouse.
Request HD Fire Foam Pourer Quote Call: +91-9912825442Complete coverage across the foam-pourer equipment family — foam chambers, foam pourers, foam-water sprinklers, foam concentrate proportioners and tank-rim foam protection systems.
Type II top-pourer foam chamber for above-ground petroleum storage tank rim foam application — installed at the tank shell with the foam-pourer angled to deliver foam onto the burning fuel surface. Aluminium-bronze body, foam-application rate 4 lpm/m² typical. Sizes for tank diameter range 5m to 100m+. UL Listed / FM Approved / IS 884 compliant. The standard for petroleum storage tank-rim protection.
Sub-surface foam injection system — foam concentrate is injected at the bottom of the storage tank, foam rises through the burning fuel and forms protective blanket at the surface. For high-flash-point hydrocarbons + alcohol-resistant foam applications. Specialised installation requiring tank-bottom injection ports.
Foam-water sprinkler heads for foam-water deluge applications — combine sprinkler discharge pattern with foam concentrate induction. For aircraft hangar protection, refinery process-area protection, helicopter pad protection. Per NFPA 16 foam-water sprinkler standard.
Foam concentrate proportioning equipment — eductor / venturi-type foam makers for portable + semi-portable foam systems. Foam concentrate is inducted into the water flow at the eductor + delivered as expanded foam to the application point. For mobile fire-tender + foam-trolley applications + low-volume fixed installations.
Balanced-pressure foam concentrate proportioning systems with bladder tanks for fixed-installation foam-water + foam-only systems. Maintains constant foam concentration regardless of water-flow variation. For refinery + petrochemical fixed foam-water-deluge systems where flow rates vary widely with detection-zone activation.
Foam concentrate storage tanks (atmospheric + bladder-tank types), foam concentrate pumps, level indicators, sampling kits, and complete foam-system accessories. AFFF + AR-AFFF + alcohol-resistant + protein + fluoroprotein foam concentrate types. Per NFPA 11 + IS 4308 specifications.
Standard property values across the range. TDS / MSDS / per-batch COA available on enquiry.
| Property | Test / Standard | Type II Pourer | Sub-Surface | Foam-Water Spr |
|---|---|---|---|---|
| Type | — | Top-pourer | Bottom-injection | Foam-water sprinkler |
| Application Method | NFPA 11 | Tank rim, surface | Sub-surface, rising | Spray, foam-water mix |
| Foam Application Rate (lpm/m²) | NFPA 11 | 4.1 (petroleum) | 4.1 (petroleum) | 4.1-6.5 |
| Body Material | — | Aluminium-bronze | Stainless steel | Bronze |
| Approvals | UL / FM / TAC / IS 884 | Yes (all four) | UL / FM / IS | UL / FM / NFPA 16 |
| Tank Size Suitability (m diameter) | — | 5-100+ | Any (tank-design dependent) | Aircraft hangar / refinery |
| Foam Type Compatibility | — | AFFF / AR-AFFF / Protein | AFFF / AR-AFFF / Protein | AFFF / AR-AFFF |
| Maximum Working Pressure (bar) | — | 10 | 10 | 12 |
Standards compliance: UL 162 (foam-system equipment) · FM 5130 / 5310 · TAC Approved · IS 884:1985 (foam-pourers) · IS 4308 (foam concentrate) · NFPA 11 (foam systems) · NFPA 11A (medium- and high-expansion foam) · NFPA 16 (foam-water sprinkler) · OISD 116/117 (refinery / petrochemical fire protection)
Where HD Fire foam-pourer systems ship from our Hyderabad warehouse — by hazard type and installation profile.
Type II top-pourer foam chambers for above-ground petroleum storage tank rim foam protection per NFPA 11 + OISD 116/117. HPCL Visakhapatnam Refinery, ONGC Tatipaka, Nagarjuna Fertilisers, RCF petrochemical operations are common customers. Pairs with our refinery fire protection portfolio.
Foam-water deluge with foam pourers + foam-water sprinklers for LPG bullet tanks + mounded LPG storage + propane / butane facilities. BPCL, HPCL, IOCL LPG bottling plants + storage terminals. Foam blanket suppresses LPG vapour-cloud fires.
Foam-water sprinklers (NFPA 16) + foam-water deluge for aircraft hangar protection — civil aviation hangars, military aircraft hangars, helicopter hangars. Defence + civil-aviation customer base + airport authority customers.
Sub-surface bottom-injection foam systems for high-flashpoint hydrocarbon tanks (diesel, lubricant, asphalt storage) + alcohol-resistant applications. Specialised installation requiring tank-bottom injection ports + alcohol-resistant foam concentrate.
Foam-water-deluge installations for solvent-extraction plant + paint-shop spray-booth + woodworking finishing-area + plastic-extrusion foam-blanket applications. Pharma + chemical-process plant secondary fire-protection layer.
Eductor / venturi foam-maker proportioning equipment for mobile + semi-portable foam systems — fire-tender foam application, foam-trolley refinery fire response, mine-rescue foam application equipment. Defence + mine-rescue + airport-fire-tender customers.
For refinery + petrochemical + EPC contractors specifying foam-system equipment — UL/FM/IS approval status + foam concentrate compatibility + system hydraulic design + bladder-tank vs balanced-pressure selection shape system performance + insurance compliance.
Genuine HD Fire Protect equipment through manufacturer-authorised supply. UL / FM / TAC / IS approval documentation provided per shipment. Cartridge-traceability for warranty claims after service incidents.
Common-spec items stocked at Secunderabad warehouse for fast dispatch. Specialised configurations 1-2 weeks from HD Fire's Mumbai factory. Pan-India delivery to project sites under Vasundhara logistics control.
Hydraulic calculations, BOQ preparation, NFPA / IS compliance verification, design-document support for foam pourer systems integration into the broader fire-protection system. Free for projects where Vasundhara is the supply partner.
One PO for HD Fire foam pourer systems + companion equipment (hydrant valves, sprinklers, deluge valves, foam systems, monitors). Simplified procurement for EPC contractors and plant safety teams. See our HD Fire brand page.
Per-shipment test certificates, UL/FM/TAC type-test certificates, IS conformance reports, manufacturer authorisation letters. Suitable for fire department NOC submission, factory safety audit, MEP consultant submittals, and EPC project documentation.
GeM-registered seller — HD Fire equipment available under standing rate contract for PSU and Defence buyers. GFR-2017 compliant for deferred-payment supply. Documentation pack ready for streamlined Direct Procurement / L1 mode under GeM.
Standard packaging across the range. Bulk pricing on volumes >1,000 L.
| Pack Format | Volume | Typical Use Case |
|---|---|---|
| Pail (HDPE) | 20 L | Single-machine top-up, sample-and-trial orders |
| Drum | 50 L | Mid-duty maintenance stock |
| Barrel (steel) | 210 L | Plant maintenance stores standard |
| IBC Tote | 1000 L (1 MT) | Bulk supply for high-volume users |
| Bulk Tanker | 3,000-5,000 L+ | Direct-to-tank delivery, large plants |
Visit Our Office: H.No. 10-2-309, Flat No. 201, Sudha Vaishnavi Residency, Street No. 4, West Marredpally, Secunderabad, Telangana 500026 | View on Google Maps
Common questions from refinery, petrochemical, aviation and EPC contractor buyers sourcing HD Fire foam pourer systems through Vasundhara.
NFPA 11 classifies foam application by method: Type I — gentle foam application without breaking foam blanket on impact (rare in modern systems). Type II — top-pourer foam chambers that direct foam onto tank shell + tank rim, foam flows down and across burning surface (the most common refinery / petrochemical method). Type III — direct foam application onto the burning surface (e.g., monitor / hose-stream foam application). Sub-surface foam injection is a separate category for high-flashpoint applications. HD Fire's Type II top-pourer foam chambers are the standard for above-ground petroleum storage tank-rim protection.
HD Fire foam pourer + foam-water sprinkler systems are compatible with all standard foam concentrate types: AFFF (Aqueous Film Forming Foam — petroleum), AR-AFFF (Alcohol-Resistant AFFF — alcohol + polar solvents), Protein foam (older specification, still used in some installations), Fluoroprotein foam (Type 2 hydrocarbon resistance). Foam concentrate is procured separately + sourced from foam concentrate manufacturers per NFPA 11 + IS 4308 specifications. Vasundhara can support foam concentrate sourcing through partner network.
Per NFPA 11 + OISD 116/117: design foam application rate is 4.1 lpm/m² of tank surface area for Type II top-pourer protection on above-ground petroleum storage tanks (gasoline, diesel, kerosene, jet fuel, lubricants). For high-hazard hydrocarbons + alcohol-resistant applications: higher rates (5-7 lpm/m²) may be required. For sub-surface foam injection: same rate but injection point at tank bottom. Hydraulic calculation per NFPA 11 confirms total foam concentrate + water flow for the design fire scenario.
Balanced-pressure foam proportioning maintains constant foam concentration regardless of water flow variation — the right choice for installations with widely-varying water flow (multi-zone deluge with selective activation). Bladder-tank foam proportioning is simpler + cost-economic but works well only at the design flow rate. For most refinery + petrochemical fixed installations: balanced-pressure with bladder-tank is the standard combination. For simpler single-zone applications: bladder-tank-only is acceptable. Vasundhara's engineers help with proportioning system selection for projects where we are the supply partner.
Yes. HD Fire's foam pourer system equipment (Type II top-pourer foam chambers, foam-water sprinklers, foam-water deluge components, foam concentrate proportioners) carries UL Listing + FM Approval + TAC Approval + IS 884 / IS 12835 compliance. Per-shipment approval certificates provided. Suitable for refinery / petrochemical OISD compliance audit, factory-safety audit, MEP consultant submittals, EPC project documentation, insurance compliance.
Common-spec items (Type II top-pourer foam chambers for tank diameter 10-30m, foam-water sprinklers for aircraft hangar) — 4-6 weeks from HD Fire's Mumbai factory dispatch + 2-3 days from Secunderabad logistics. Specialised configurations (sub-surface foam injection, foam concentrate proportioner systems with bladder tanks, large-tank foam-pourer installations >50m diameter) — 8-12 weeks lead time. Bulk volumes for tier-1 refinery / petrochemical project foam-system EPC supply typically quoted on 12-16 week lead time with project-pricing terms.
Yes. Vasundhara is GeM-registered seller. HD Fire foam pourer systems available under standing rate contract for PSU buyers — IOCL, BPCL, HPCL, ONGC, GAIL, RCF, GSFC, NFL, defence establishments, central / state PSU petrochemical + refinery operations. GFR-2017 compliant for deferred-payment supply. Documentation pack includes Udyam-MSME registration, manufacturer authorisation from HD Fire Protect, UL/FM/TAC/IS approval certificates.
Yes. Vasundhara Performance Solutions Pvt Ltd is the authorised HD Fire Protect fire-protection equipment distributor for Hyderabad, Telangana and Andhra Pradesh. We supply genuine HD Fire foam pourer systems with full manufacturer authorisation documentation provided on enquiry. For our complete HD Fire portfolio, see our HD Fire brand page.
Complete HD Fire portfolio supplied by Vasundhara — single-vendor sourcing for refinery + petrochemical + industrial fire-protection EPC projects.
Send us your requirement, pack size and quantity — quote returned within 4 hours during business hours.
Request Quote Call Now