Vasundhara Performance Solutions is the authorised Hyderabad supplier for the Veedol cutting oil range — soluble (emulsifiable) cutting fluids, semi-synthetic cutting fluids, fully synthetic cutting fluids, neat cutting oils, broaching oils, grinding fluids, and EDM dielectric oil. For CNC turning, milling, drilling, tapping, gear-hobbing, broaching, grinding, and centre-less / ID-grinding operations across ferrous + non-ferrous machining. Suitable for high-speed steel + tungsten-carbide + CBN / PCD tooling. Pan-India dispatch from Secunderabad warehouse.
Request Veedol Cutting Oil Quote Call: +91-9912825442Complete coverage across soluble emulsions, semi-synthetic micro-emulsions, fully synthetic solutions, and neat cutting oils for every machining + grinding scenario.
Mineral-base emulsifiable cutting oil — mixed with water at 5-10% concentration to form a milky-white emulsion. The cost-economic default for general-purpose CNC machining of mild steel, alloy steel, cast iron. Anti-corrosion + anti-bacterial additive package. Per IS 1115 (cutting oil) specification. Standard for tier-2 / tier-3 auto-ancillary plants.
Semi-synthetic cutting fluid — mixed with water at 5-10% concentration to form a translucent emulsion. Lower mineral oil content + higher emulsifier + specialty additive package. Improved corrosion protection, longer sump life (3-6 months), better swarf settling. Suitable for CNC machining of stainless steel, aluminium, copper alloys, and mid-precision machining.
Fully synthetic (oil-free) cutting fluid — mixed with water to form a clear solution. No mineral oil — uses synthetic boundary-lubricants + corrosion inhibitors. Excellent visibility in machining zone, very long sump life (6-12 months), low foaming. Standard for CNC grinding, fine-finish machining, transparent-coolant requirement applications. Premium pricing.
Neat (undiluted) cutting oil with EP additive package — for severe-duty machining where soluble emulsions can't deliver enough boundary lubrication. Gear-hobbing, broaching, deep-hole drilling, thread-cutting on hardened steels. Mineral-base with chlorinated paraffin or sulphur-based EP chemistry. ISO VG 22, 32, 46 viscosity grades.
Grinding-specific cutting fluid — optimised for low-foam + high-particle-settling for grinding-swarf removal. Soluble emulsion or fully synthetic variants. Critical for centre-less grinding, surface grinding, ID grinding, gear-grinding operations where consistent wheel-dressing matters.
EDM (electric discharge machining) dielectric oil — low-viscosity, high-flash-point, low-aromatic mineral oil for sinker EDM and wire EDM operations. Excellent dielectric strength + flush-out characteristics. Standard for tool-and-die-shop EDM machines + plastic-mould EDM service.
Standard property values across the range. TDS / MSDS / per-batch COA available on enquiry.
| Property | Test Method | Soluble Min | Semi-Synth | Synth Soln | Neat EP 32 |
|---|---|---|---|---|---|
| Type / Form | — | Milky emulsion | Translucent emulsion | Clear solution | Neat oil |
| Mineral Oil Content (%) | — | 55-65 | 30-50 | 0 | 100 |
| Recommended Concentration (%) | — | 5-10 | 5-10 | 3-7 | Neat (100%) |
| Typical pH (in-use) | — | 9.0-9.5 | 9.0-9.5 | 9.0-9.5 | — |
| Anti-bacterial Additive | — | Yes | Yes | Yes | — |
| Sump Life (months) | Field service | 1-3 | 3-6 | 6-12 | 12-24 |
| Visibility in Cutting Zone | — | Low (milky) | Medium | High (clear) | High (clear) |
| Disposal — Pre-treatment Required | — | Yes (oil split) | Yes | Less | Yes (used-oil) |
Standards compliance: IS 1115 (cutting oils) · IS 5557 (water-soluble cutting fluids) · IS 13628 (synthetic and semi-synthetic) · DIN 51385 (cutting fluids) · ISO 6743-7 (machining fluids) · OEM specs from Mazak / Doosan / Mori Seiki / Hyundai WIA / TAL Machines
Where Veedol cutting oils ship from our Hyderabad warehouse — by machining operation and material type.
Soluble cutting oil 5-7% concentration for general CNC turning, milling, drilling on mild steel + alloy steel. Standard for tier-2 / tier-3 auto-ancillary plants. Pairs with our CNC machining portfolio.
Semi-synthetic cutting fluid 5-8% for stainless steel, aluminium alloys, copper machining. Lower mineral content reduces aluminium discoloration. Synthetic for high-precision aluminium aerospace machining. Auto-ancillary tier-1 plants frequently specify semi-synthetic.
Neat cutting oil VG 22/32/46 with EP package for gear-hobbing on automotive transmission gears, axle gears, OEM gear-shop production. Broaching oil for keyway broaching, internal-spline broaching. Premium high-EP chemistry — 4-Ball EP weld load >315 kg.
Grinding fluid (soluble or synthetic) optimised for swarf settling + wheel dressing. Centre-less grinding, surface grinding, ID grinding of bearing rings, ball-screw grinding. Tier-1 auto-ancillary + bearing manufacturers (NRB, FAG India, SKF India) are common customers.
Veedol EDM dielectric oil for sinker EDM + wire EDM operations in plastic-mould tool-shops, die-shops, aerospace machining. High dielectric strength + good flush-out + low-aromatic for shop-floor health and safety.
Soluble cutting fluid as the workhorse across press-shop secondary machining operations, CNC parks for engine + transmission components, auto-component machining lines. Patancheru, Bonthapally, IDA Bollaram cluster. Pairs with our auto-ancillary.
For CNC park managers and tool-room supervisors selecting cutting fluid — sump life, swarf settling, foaming behaviour, and operator-friendly properties shape day-to-day machining productivity.
Stocked grades ship same-day from Secunderabad warehouse. Specialty / synthetic variants typically 3-5 working days. Pan-India dispatch via authorised transport network.
Genuine Veedol product through manufacturer-authorised supply. Manufacturer authorisation documentation provided on enquiry. Per-batch traceability for warranty + audit-trail compliance.
Viscosity selection, drain-interval optimisation, cross-equivalence mapping with competitor brands, contamination-event troubleshooting. Free for projects where Vasundhara is the supply partner.
Bundle Veedol products with our wider lubricant + grease + speciality-fluid portfolio. One PO, simplified GST reconciliation, single accountable contact for plant-wide supply.
Per-batch test certificates (TDS, MSDS, COA), manufacturer authorisation letters, BIS conformance reports where applicable. Suitable for ISO 9001 / IATF 16949 / pharma audits. Pre-shipment sample retention available.
Periodic sample analysis — viscosity, TAN/TBN, water content, particle count (ISO 4406), wear-metal spectrometry. Optimises drain intervals (typically 20-40% extension over manufacturer defaults) + catches failure modes early.
Standard packaging across the range. Bulk pricing on volumes >1,000 L.
| Pack Format | Volume | Typical Use Case |
|---|---|---|
| Pail (HDPE) | 20 L | Single-machine top-up, sample-and-trial orders |
| Drum | 50 L | Mid-duty maintenance stock |
| Barrel (steel) | 210 L | Plant maintenance stores standard |
| IBC Tote | 1000 L (1 MT) | Bulk supply for high-volume users |
| Bulk Tanker | 3,000-5,000 L+ | Direct-to-tank delivery, large plants |
Visit Our Office: H.No. 10-2-309, Flat No. 201, Sudha Vaishnavi Residency, Street No. 4, West Marredpally, Secunderabad, Telangana 500026 | View on Google Maps
Common questions from CNC and tool-room buyers sourcing Veedol cutting oils through Vasundhara.
Soluble cutting fluid is mineral-base emulsion (55-65% mineral oil) — cost-economic, milky in-use appearance, 1-3 month sump life. Semi-synthetic has lower mineral content (30-50%) + higher emulsifier — translucent emulsion, 3-6 month sump life, better corrosion protection. Synthetic is fully oil-free — clear solution, 6-12 month sump life, excellent machining-zone visibility, premium pricing. Choose based on machining duty, sump-management capability, and operator preference. Mixed-mode shops often run different fluids on different machines.
Standard concentration ranges: general CNC turning/milling on mild steel — 5-7%; harder materials (stainless, hardened alloy steel) — 7-10%; aluminium machining — 4-6%; grinding — 3-5%; tapping / threading — 8-12% (high boundary lubrication). Always use a refractometer to verify concentration matches the target after mixing — visual estimation is unreliable. Vasundhara provides refractometers + concentration calibration tables as part of the supply relationship.
For well-maintained CNC machining sumps with proper pH monitoring (9.0-9.5), tramp-oil skimming, and microbial control: Veedol soluble cutting fluid typically delivers 1-3 month sump life. Veedol semi-synthetic extends to 3-6 months, fully synthetic to 6-12 months. Sump life depends heavily on tramp-oil ingress + operator-skin contamination + microbial growth — proper sump management can double the typical sump life.
Veedol's standard cutting fluid range uses non-chlorinated EP additives (sulphur-phosphorus chemistry) for soluble emulsions — chlorine-free formulation. Biocide additives are non-formaldehyde-release where possible — using isothiazolinone or oxazolidine chemistry. For specific compliance requirements (EU REACH, RoHS, customer-specific bans), full ingredient disclosure available on enquiry. Aerospace / pharma machining customers should request the SDS confirming compliance with their internal restricted-substance list.
Operator dermatitis prevention requires: (1) proper concentration (NOT over-concentrated — verify via refractometer), (2) pH monitoring (9.0-9.5 ideal — alkaline-skin-irritating range starts >9.8), (3) regular sump replacement before microbial / TAN buildup, (4) personal protective equipment (gloves, face-shield as needed), (5) clean operator skin contact. Veedol's biocide package is conservative (low formaldehyde-release). For sensitive operators, switching to fully synthetic cutting fluid (no mineral oil) typically resolves persistent dermatitis cases.
Yes. Veedol's fully synthetic cutting fluid is suitable for aerospace aluminium-alloy machining where (1) high machining-zone visibility matters for precision-machining operators, (2) long sump life (6-12 months) reduces fluid-management cost in low-volume aerospace shops, (3) clear-solution chemistry reduces aluminium discoloration / staining, (4) chlorine-free formulation meets aerospace customer chemistry-restriction lists. Confirm specific aerospace customer's approved-fluid list before changeover.
Yes. Vasundhara is GeM-registered seller. Veedol cutting oils available under standing rate contract for PSU buyers — Indian Railways workshops, BHEL machining, Defence ordnance factories, MIDHANI, MBPL, HMT, BEL. Documentation pack includes Udyam-MSME registration, manufacturer authorisation from Tide Water Oil, and standard PSU procurement compliance suite.
Yes. Vasundhara Performance Solutions Pvt Ltd is the authorised Veedol industrial lubricant distributor for Hyderabad, Telangana and Andhra Pradesh. We supply genuine Veedol cutting oils manufactured by Tide Water Oil Co. (India) Ltd, with full manufacturer authorisation documentation provided on enquiry. For our complete Veedol portfolio, see our Veedol brand page.
Complete Veedol industrial portfolio supplied by Vasundhara.
Send us your requirement, pack size and quantity — quote returned within 4 hours during business hours.
Request Quote Call Now