Vasundhara Performance Solutions is the authorised Hyderabad supplier for SELCO anti-spatter spray — water-based and solvent-based welding spatter prevention chemistries. For MIG/MAG semi-automatic welding torches (sprayed onto contact tips + gas nozzles to prevent spatter adhesion) + manual welding work (sprayed onto parent metal surrounding the weld area to prevent spatter sticking). Reduces post-welding cleanup time 60-80% in high-volume welding operations. For auto-ancillary press + welding shops, structural fabrication, shipyard welding across India.
Request Anti-Spatter Quote Call: +91-9912825442Complete SELCO anti-spatter portfolio — water-based + solvent-based formulations for MIG/MAG torches + manual welding applications.
Water-based anti-spatter spray for MIG/MAG welding torch contact-tip + gas-nozzle application. Sprayed onto torch components every 30-60 minutes to prevent spatter adhesion. Reduces nozzle-cleanup time 60-80%.
Solvent-based anti-spatter for manual welding work — sprayed onto parent metal surrounding the weld area to prevent spatter sticking. Faster-drying than water-based + better persistence on vertical surfaces.
Silicone-free anti-spatter for applications where downstream painting / coating quality is critical — silicone residue can cause paint-adhesion failure. For auto body-in-white welding + appliance manufacturer painted-coating applications.
Bulk supply for production welding shops — 20 L / 200 L drums for refill + transfer to spray bottles. Lower cost-per-litre vs ready-to-spray bottles.
Pre-pressurised aerosol cans (500 mL standard) for site + maintenance + repair welding. Convenient + portable for field-welding operations. Sold by case.
Anti-spatter bundled with SELCO cutting coolants + related welding-shop specialty chemicals for high-volume auto-ancillary + structural fab supply contracts.
Standard property values across the range. TDS / MSDS / per-batch COA available on enquiry.
| Property | Test Method | Water-Based | Solvent-Based | Silicone-Free Premium |
|---|---|---|---|---|
| Base Chemistry | — | Water + surfactant | Solvent + film-former | Synthetic ester |
| Density (g/mL) | ASTM D4052 | 0.98-1.02 | 0.85-0.92 | 0.85-0.92 |
| Flash Point (°C) | ASTM D92 | Non-flammable | ≥38 | ≥60 |
| Drying Time (sec) | Visual | 30-60 | 10-30 | 20-45 |
| Persistence on Vertical Surface | Field | Moderate | Excellent | Good |
| Spatter-Reduction Effectiveness | Field | 60-70% | 70-85% | 70-80% |
| Silicone Content | GC/MS | 0 | Low | 0 (Silicone-Free) |
| Recommended Use Frequency (torch) | — | 30-60 min | 60-120 min | 60-90 min |
Standards compliance: Industrial welding spatter prevention chemistry · AWS welding-environment safety guidance · Compatibility with downstream painting / coating systems (silicone-free variants for body-in-white)
Where SELCO anti-spatter sprays ship from our Hyderabad warehouse.
Water-Based + Premium (Silicone-Free) for auto body-in-white welding + chassis welding + sub-assembly welding. Bharat Forge, Sundaram-Clayton, Mahindra CIE, Tata AutoComp robotic welding cells.
Premium (Silicone-Free) for refrigerator + AC + washing-machine chassis welding where downstream painting quality matters. Bosch, Whirlpool, LG, Voltas, Godrej.
Solvent-Based for structural steel fabrication welding — beams, plates, girders. L&T, BHEL, Tata Structurals + tier-1 structural fabricators.
Water-Based + Solvent-Based for shipyard plate welding + internal structure welding. Cochin Shipyard, Mazagon Dock + contractor fabricators.
Aerosol cans for refinery turnaround welding + power-plant maintenance welding + pipeline tie-in welding. Convenient + portable for field operations.
Aerosol cans for tier-2 + tier-3 fabricator + plant maintenance + small-shop welding operations across India.
Specialty welding spatter prevention chemistry — water-based for general welding + solvent-based for vertical-surface persistence + silicone-free for painted-coating compatibility. SELCO delivers proven welding-shop chemistry at competitive Indian pricing.
Stocked grades ship same-day from Secunderabad warehouse. Specialty / synthetic variants typically 3-5 working days. Pan-India dispatch via authorised transport network.
Genuine SELCO product through manufacturer-authorised supply. Manufacturer authorisation documentation provided on enquiry. Per-batch traceability for warranty + audit-trail compliance.
Viscosity selection, drain-interval optimisation, cross-equivalence mapping with competitor brands, contamination-event troubleshooting. Free for projects where Vasundhara is the supply partner.
Bundle SELCO products with our wider lubricant + grease + speciality-fluid portfolio. One PO, simplified GST reconciliation, single accountable contact for plant-wide supply.
Per-batch test certificates (TDS, MSDS, COA), manufacturer authorisation letters, BIS conformance reports where applicable. Suitable for ISO 9001 / IATF 16949 / pharma audits. Pre-shipment sample retention available.
Periodic sample analysis — viscosity, TAN/TBN, water content, particle count (ISO 4406), wear-metal spectrometry. Optimises drain intervals (typically 20-40% extension over manufacturer defaults) + catches failure modes early.
Standard packaging across the range. Bulk pricing on volumes >1,000 L.
| Pack Format | Volume | Typical Use Case |
|---|---|---|
| Pail (HDPE) | 20 L | Single-machine top-up, sample-and-trial orders |
| Drum | 50 L | Mid-duty maintenance stock |
| Barrel (steel) | 210 L | Plant maintenance stores standard |
| IBC Tote | 1000 L (1 MT) | Bulk supply for high-volume users |
| Bulk Tanker | 3,000-5,000 L+ | Direct-to-tank delivery, large plants |
Visit Our Office: H.No. 10-2-309, Flat No. 201, Sudha Vaishnavi Residency, Street No. 4, West Marredpally, Secunderabad, Telangana 500026 | View on Google Maps
Common questions from welding-shop + fabrication operators sourcing SELCO anti-spatter through Vasundhara.
Anti-spatter forms a thin film on the torch contact-tip + gas nozzle + parent metal surface. When welding spatter (molten metal droplets thrown from arc) hits the protected surface, the film prevents spatter from sticking — spatter beads up + falls off rather than adhering. Reduces post-welding cleanup time 60-80% in high-volume welding.
Water-based for general MIG/MAG torch application — sprayed onto contact tips + gas nozzles every 30-60 min during production welding. Solvent-based for manual welding parent-metal application — faster-drying + better persistence on vertical surfaces. Solvent-based has flash-point + ventilation considerations.
Silicone residue on weld surfaces causes downstream painting failures — silicone interferes with paint adhesion + creates fish-eye defects in the final coat. Auto body-in-white welding + appliance manufacturer painted-coating applications require silicone-free anti-spatter chemistry to avoid expensive painting rework. Premium silicone-free SELCO chemistry is the standard for auto-OEM body-in-white.
Standard practice: every 30-60 minutes during continuous welding for water-based, 60-120 minutes for solvent-based. Spray contact tip + gas nozzle while welder cools (between weld passes or at break). Excess spray ends up on parent metal which is also protective.
Yes — SELCO anti-spatter sprays are functional equivalents to Walter / Foxweld / WS / Magnaflux Spatter-Halt etc. at matched chemistry category. Cross-equivalence documentation provided. Migration is straightforward — no system flush required, simply switch between sprays.
Yes. Bulk: 20 L pail + 200 L drums for production refill stations. Aerosol: 500 mL pre-pressurised cans (12-can carton, by case for shop-floor supply). Bundle pricing for combined bulk + aerosol orders to high-volume welding shops.
Yes — Vasundhara is the authorised SELCO / Synthlube specialty-lubricant distributor for Hyderabad, Telangana, Andhra Pradesh, Karnataka and South India. Full manufacturer authorisation documentation provided on enquiry. See our SELCO brand page.
Complete SELCO specialty lubricant portfolio supplied by Vasundhara.
Tell us your welding process (MIG / MAG / manual / robotic), monthly consumption (litres or aerosol cans), painted-coating compatibility requirements, and quantity needed. We'll respond with bulk + aerosol bundle pricing within one business day.
Request Quote Call Now