Vasundhara Performance Solutions is the authorised Hyderabad supplier for the complete HD Fire Protect hydrant valve range — single-headed, double-headed, oblique and gunmetal landing valves built to IS 5290:1993, UL/FM listed, and TAC approved for industrial fire-fighting installations. Supply across Telangana, Andhra Pradesh, refineries, petrochemical plants, factories, warehouses, multi-storey commercial buildings, and PSU/Defence sites through GeM rate contract. Hydraulic-design support, installation guidance, and post-installation testing included.
Request Hydrant Valve Quote Call: +91-9912825442Complete coverage across landing valve types for every industrial fire-protection scenario — from single-instrument-line shut-offs through multi-headed firefighting risers and refinery-grade gunmetal valves.
Standard 63 mm BSP-F threaded inlet × 63 mm outlet single-instantaneous-coupling landing valve. The most-specified configuration for factory wet-riser systems, multi-storey commercial buildings, and warehouse fire installations. IS 5290:1993 compliant. Working pressure: 1.05 N/mm² (10.5 bar). Outlet handles 38 mm or 63 mm hose connections via instantaneous coupling.
Two 63 mm outlets on a single 100 mm BSP-F inlet body — for high-flow fire scenarios where two hose lines must operate simultaneously (refinery tank-farm protection, petrochemical pump houses, large warehouses). Each outlet has independent shut-off. IS 5290 + UL listed for high-rise installations.
45° angled landing valve for installations where space constraints prevent straight-pattern valve mounting (under stairwells, tight riser shafts, basement parking pump-rooms). Outlet projects at 45° from inlet axis. Available in 63 mm and 80 mm sizes. Same IS 5290 / UL pressure rating as straight-pattern.
Solid gunmetal (LG-2) construction for corrosive service environments — refineries, petrochemical plants, fertilizer industry, marine installations. Higher initial cost vs cast-iron / SS-equivalent valves but service life 3-5× longer in salt-air or acid-vapour environments. UL listed.
SS 304 (general industrial) or SS 316 (food-grade, pharma cleanroom-adjacent) construction. Common in pharma plants (Genome Valley, Bachupally cluster), food-processing facilities, dairy industries. Same flow specs as gunmetal but lighter weight + lower cost than gunmetal for non-corrosive applications.
Free-standing fire hydrant pillar post with 63 mm × 2 or 63 mm × 1 outlets. For refinery tank-farm protection, factory yard fire mains, warehouse perimeter fire-protection lines. Cast-iron body with hot-dip galvanised finish. IS 909 + IS 5290 compliant. Below-ground inlet riser, above-ground operating wheel and outlets.
Standard property values across the HD Fire hydrant valve range. Detailed TDS / installation drawings / pressure-test certificates available on enquiry.
| Property | Standard | Single 63mm | Double 63×2mm | Oblique 80mm |
|---|---|---|---|---|
| Conformance | IS 5290:1993 | ✓ | ✓ | ✓ |
| UL Listing | UL 668 | Optional | ✓ | Optional |
| FM Approval | FM 1037 | Optional | ✓ | — |
| TAC Approval | TAC India | ✓ | ✓ | ✓ |
| Working Pressure | — | 10.5 bar | 10.5 bar | 10.5 bar |
| Hydrostatic Test Pressure | — | 21 bar | 21 bar | 21 bar |
| Inlet Connection | BSP-F | 63 mm | 100 mm | 80 mm |
| Outlet Connection | Instantaneous Coupling | 63 mm × 1 | 63 mm × 2 | 63 mm or 80 mm |
| Body Material (standard) | — | Cast Iron / SS | Cast Iron / SS | Cast Iron / SS |
| Internal Wear Parts | — | Gunmetal | Gunmetal | Gunmetal |
| Operating Method | — | Hand wheel | Hand wheel | Hand wheel |
Compliance: IS 5290:1993 (Indian Standard for Landing Valves) · UL 668 (Hose Valves for Fire Protection) · FM 1037 · TAC (Tariff Advisory Committee India) · NFPA 14 (Standard for Standpipe Systems)
Where HD Fire hydrant valves ship from our Hyderabad warehouse — by industry and installation type.
Tank-farm fire-water rings, pump-house manifolds, process-area hydrant pillar posts. Gunmetal landing valves for corrosive vapour-zone installations. Double-headed for high-flow tank-cooling scenarios. Pairs with our refinery fire protection systems portfolio.
Wet-riser systems, factory hydrant rings, process-block fire stations. Single-headed 63 mm is the default. Steel mills, automotive ancillary plants, fabrication shops in Patancheru, Jeedimetla, IDA Bollaram, Bonthapally, Sanathnagar industrial corridors.
Wet-riser landing valves at every floor (per NBC India Group A2/A3 occupancy requirements). Single-headed 63 mm landing valves at each landing, oblique pattern where stairwell space is constrained. Compliance with NBC + state fire authority approval.
Factory yard hydrant rings, racking-block protection, dispatch-bay fire stations. Underground pillar posts with double-headed configuration for high-flow. Insurance-mandated fire protection for high-pile-storage warehouses.
SS 304 / SS 316 landing valves for pharma cleanroom-adjacent areas (Genome Valley, Bachupally cluster) and food-processing plants where stainless-steel finish is mandated by hygiene audits. Pairs with our pharma cleanroom support.
GeM rate-contract supply for government installations — defence stations, PSU offices, public buildings. IS 5290 conformance certificates + TAC approval documents provided. Bulk supply for multi-building campus installations.
For fire-protection consultants and plant safety officers, the choice of distribution channel matters as much as the brand — installation-design support, compliance documentation, and post-installation service availability all factor in.
Vasundhara is the authorised HD Fire Protect distributor for Hyderabad, Telangana, Andhra Pradesh. Genuine factory-supplied valves with full manufacturer warranty + UL/FM/TAC documentation per consignment.
Our engineers help size hydrant valves for your fire-water system — flow calculation, pressure-drop analysis, valve sizing per IS 13039 (fire hydrant system standard). Free for projects where Vasundhara is the supply partner.
Every consignment ships with IS 5290 certificate, TAC approval, UL listing card (where applicable), pressure-test certificate, and material composition report. Suitable for state Fire Department NOC submissions and insurance audit packs.
Stocked sizes (63 mm single + double-headed landing valves) ship same-day from Secunderabad warehouse. Less-common configurations (gunmetal, SS, oblique) typically 3-7 working days. Bulk pillar-post supply on case-by-case schedule.
GeM-registered seller for PSU and Defence procurement. GFR-2017 compliant for deferred-payment supply. Documentation pack includes Udyam-MSME, Make-in-India eligibility (HD Fire is Indian-manufactured), and standard PSU compliance suite.
One PO for hydrant valves + HD Fire sprinklers + deluge valves + hose reels + monitor nozzles + foam pourer. Reduces vendor count for fire-system installation contractors. Pairs with our complete HD Fire portfolio.
Most-specified hydrant valve combinations for typical industrial and commercial fire installations.
| Application | Valve Type | Quantity (typical) | Notes |
|---|---|---|---|
| Factory wet-riser (single block, 4 floors) | Single-Headed 63 mm | 1 per floor | 4 valves total |
| Multi-storey commercial (10+ floors) | Single-Headed 63 mm | 1 per floor + landing | NBC compliance required |
| Refinery tank-farm ring main | Double-Headed 63 mm × 2 (Gunmetal) | 1 every 90-120 m | NFPA 11 / OISD 116 spacing |
| Petrochemical pump-house | Double-Headed Gunmetal | 2-4 per pump house | High-flow tank-cooling |
| Warehouse perimeter | Underground Pillar Post (Double-Headed) | 1 every 90 m | IS 909 standard |
| Pharma plant cleanroom-adjacent | Single-Headed SS 316 | 1 per zone | Hygiene-audit compliant |
| Restricted-space basement / stairwell | Oblique 63 mm | As required | 45° projection saves 200-300 mm depth |
Visit Our Office: H.No. 10-2-309, Flat No. 201, Sudha Vaishnavi Residency, Street No. 4, West Marredpally, Secunderabad, Telangana 500026 | View on Google Maps
Common questions from fire-protection consultants, EPC contractors, and plant safety officers sourcing HD Fire hydrant valves through Vasundhara.
Single-headed (63 mm × 1 outlet) is the standard configuration for factory wet-riser systems and multi-storey commercial buildings — adequate flow for one hose-line operation. Double-headed (63 mm × 2 outlets on 100 mm inlet) is for high-flow scenarios where two hose lines must operate simultaneously — refinery tank-cooling, petrochemical pump houses, large warehouses. Double-headed costs ~80% more than single-headed but enables 2× simultaneous flow without separate hydrant points.
Use gunmetal (LG-2 alloy) for corrosive-service environments — refineries (sulphur/H2S vapour), petrochemical (acid vapours), fertilizer plants, marine/coastal installations (salt air). Service life 3-5× longer than cast-iron in these environments. Use SS 304 for general pharma/food/dairy where hygiene audits mandate stainless. Use SS 316 for cleanroom-adjacent and high-corrosion stainless service. Cast-iron with epoxy coating is the standard cost-optimal choice for non-corrosive industrial and commercial installations.
For state Fire Department NOC (No Objection Certificate) submissions in India, typical required documents are: (1) IS 5290 conformance certificate per valve consignment, (2) TAC approval card, (3) UL/FM listing card (for projects requiring UL/FM compliance), (4) hydrostatic pressure-test certificate (21 bar test), (5) material composition report (MTC), (6) manufacturer authorisation letter from HD Fire Protect, (7) installation drawings with valve locations marked. Vasundhara provides the full documentation pack with every project supply.
All four (HD Fire, Newage, Aquatech, Padmini) are well-established Indian fire-equipment manufacturers meeting IS 5290 specifications. HD Fire's structural advantages: (1) Wider international compliance — UL listing + FM approval + TAC + IS, useful for export-oriented and IGCC/IFC-compliant projects, (2) Stronger range coverage on specialty configurations (gunmetal, SS variants, oblique patterns), (3) Newer manufacturing facility with better quality consistency at scale. For pure IS 5290-only projects with cost optimisation as priority, alternatives are competitive — but for UL/FM-required installations, HD Fire is typically the right choice.
Stocked configurations (63 mm single-headed and double-headed cast-iron landing valves) typically ship same-day for orders received before 2 PM. Less-common variants (gunmetal, SS 304/316, oblique 80 mm, underground pillar posts) typically 3-7 working days from manufacturer dispatch. For large projects (100+ valve installations), bulk supply is scheduled 2-3 weeks ahead with phased delivery. PSU rate-contract dispatches follow standard delivery schedules per the contract terms.
Yes. Vasundhara is GeM-registered seller and HD Fire hydrant valves are available under standing rate contract for PSU buyers — Indian Railways, defence stations, PSU campuses (BHEL, NTPC, NLC India, Coal India), state government buildings, public-sector airports. GFR-2017 compliant for deferred-payment supply. Documentation pack includes Udyam-MSME registration, Make-in-India certification (HD Fire is Indian-manufactured), and standard PSU procurement compliance suite.
Yes. Our engineers help size hydrant valves for your fire-water system — flow calculation, pressure-drop analysis, valve sizing per IS 13039 (fire hydrant system standard) and NFPA 14 (standpipe systems). Free for projects where Vasundhara is the supply partner. We work with your fire consultant or directly with EPC contractors. For complex multi-zone refinery and petrochemical projects, we coordinate with HD Fire's factory engineering team for OEM-grade design verification.
Yes. Vasundhara Performance Solutions Pvt Ltd is the authorised HD Fire Protect distributor for Hyderabad, Telangana and Andhra Pradesh. We supply genuine HD Fire products with full manufacturer authorisation documentation provided on enquiry. For our complete HD Fire portfolio (hydrant valves + sprinklers + deluge valves + hose reels + monitor nozzles + foam pourer systems), see our HD Fire Protect dealer page.
Explore the rest of the HD Fire Protect portfolio supplied by Vasundhara — single-vendor sourcing for the complete fire-protection installation kit.
Send us your fire-water system drawing or BOQ — quote returned within 4 hours during business hours. EPC contractor and fire-consultant enquiries handled by our project-supply team.
Request Quote Call Now