Vasundhara Performance Solutions is the authorised Hyderabad supplier for the Balmerol HP PLUS gear oil range — extreme-pressure (EP) industrial gear oils across ISO VG 100, 150, 220, 320, 460 and 680 grades, plus SAE 80W-90 and 85W-140 automotive gear oils. Manufactured by Balmer Lawrie & Co. Ltd, a Govt of India PSU under the Ministry of Petroleum & Natural Gas. The natural choice for PSU procurement under GeM rate contract — defence establishments, Indian Railways, state cement corporations, BHEL, NTPC, Coal India, SAIL. Pan-India dispatch from our Secunderabad warehouse.
Request Balmerol HP PLUS Quote Call: +91-9912825442Complete viscosity grade coverage across industrial and automotive gear lubrication, all manufactured at Balmer Lawrie's BIS / ISO 9001 certified plants.
Mineral-base extreme-pressure industrial gear oils with sulphur-phosphorus EP additive package. ISO VG 100, 150, 220, 320, 460, 680. Per ISO 12925-1 Type CKD / DIN 51517 Part 3 (CLP). The default Balmer Lawrie offering for general industrial gearbox lubrication — fans, conveyors, mixers, mid-load reduction gear cases across cement, steel and process industries.
Heavy-duty industrial gear oil with enhanced EP package for high-shock-load, high-pressure-zone gearbox applications. ISO VG 220, 320, 460, 680. For mining draglines, slag-crushing gearboxes, paper mill drying-cylinder drives. 4-Ball EP weld load ≥315 kg per ASTM D2783. FZG failure stage ≥12.
PAO-based synthetic industrial gear oils for high-temperature service (continuous >90°C oil temperature). ISO VG 220, 320, 460. Extended drain intervals (3-5× mineral grades), excellent oxidation stability, lower pour point. For wind turbine gearboxes, high-load steel mill stands, kiln drives operating in Indian summer conditions.
SAE 80W-90 and 85W-140 EP gear oils for commercial vehicle differentials, manual transmissions, and final-drive axles. API GL-5 specification. Suitable for heavy commercial vehicles, off-highway machinery, agricultural tractors, and heavy mobile equipment. The PSU-supplied default for state transport corporation (TSRTC, APSRTC, KSRTC) fleet maintenance.
Asphaltic compound for open-gear lubrication on cement-mill girth gears, kiln girth gears, sugar-mill rollers, and rotary-kiln drives. Heavy-bodied bituminous formulation with EP additive package. Brush-on, drip-on or spray-on application. Standard offering across Indian cement plants under PSU rate contract.
Lower-viscosity gear oils (ISO VG 32, 46, 68) for worm-gear sets and light-duty enclosed gear cases. Compounded mineral oils for worm-drive applications where mating-surface friction characteristics matter more than EP load capacity. Common in mid-size process pumps, mixer drives, and laboratory-scale equipment.
Standard property values across the Balmerol HP PLUS gear oil range. TDS / MSDS / per-batch COA available on enquiry.
| Property | Test Method | VG 220 EP | VG 320 EP | VG 460 EP | SAE 90 EP |
|---|---|---|---|---|---|
| Kinematic Viscosity at 40°C (cSt) | ASTM D445 | 198-242 | 288-352 | 414-506 | 180-220 |
| Kinematic Viscosity at 100°C (cSt) | ASTM D445 | ≥18 | ≥24 | ≥30 | ≥17 |
| Viscosity Index | ASTM D2270 | ≥95 | ≥95 | ≥95 | ≥95 |
| Flash Point (°C, COC) | ASTM D92 | ≥220 | ≥230 | ≥240 | ≥220 |
| Pour Point (°C) | ASTM D97 | ≤-9 | ≤-6 | ≤-3 | ≤-9 |
| 4-Ball Weld Load (kg, EP) | ASTM D2783 | ≥250 | ≥250 | ≥250 | ≥250 |
| FZG Failure Stage | DIN 51354 | ≥12 | ≥12 | ≥12 | — |
| Density at 15°C (g/cm³) | ASTM D1298 | 0.890 | 0.895 | 0.900 | 0.895 |
Standards compliance: ISO 12925-1 Type CKD · DIN 51517 Part 3 (CLP) · API GL-4 / GL-5 · IS 8406:1993 · IS 1118:1992 · BIS-marked grades available · Manufactured under Balmer Lawrie ISO 9001 / ISO 14001 / ISO 45001 certified plants
Where Balmerol HP PLUS gear oils ship from our Hyderabad warehouse — by industry segment with PSU and private-sector customer profile.
Indian Railways workshop gearbox stocks, BHEL workshop-issue gear oils, Defence vehicle depot service grades, Ordnance Factories machining-line gear cases. PSU procurement preference under GeM rate contract — Balmerol's PSU-manufactured status streamlines vendor empanelment and approval cycles.
Kiln main drive gearboxes (VG 320/460), VRM gear cases (VG 320), ball-mill drives (VG 460/680), crusher reduction gearboxes (VG 320), preheater fan drives (VG 220). Plus open-gear compound for cement-mill girth gears + kiln girth gears. Pairs with our cement plant lubricants portfolio.
Hot-strip mill stands (VG 460/680), continuous casting machine drives (VG 320), slab-mill main drives, ladle-crane gearboxes (VG 220/320), galvanising-line drives (VG 220). Customers across SAIL, RINL, MIDHANI, Visakhapatnam Steel Plant — PSU preference channels Balmer Lawrie naturally.
SAE 80W-90 / 85W-140 axle and differential oils for state transport (TSRTC, APSRTC, KSRTC, MSRTC) bus depots, regional commercial vehicle fleets, and heavy-vehicle aftermarket service. Suitable for Tata, Ashok Leyland, Eicher, Mahindra heavy-vehicle drivelines.
Cane-roller mill girth gears (open-gear compound — peak demand October-March crushing season), juice-mill reduction drives (VG 320/460), centrifuge drives (VG 220), boiler-feed pump gearboxes (VG 100/150). Cooperative sugar mills are long-standing Balmer Lawrie customers via PSU rate-contract supply.
Thermal power plant CHP gearboxes (VG 220/320), ash-handling system drives (VG 320), coal-mining haul-truck axles (SAE 90/140), conveyor reduction drives (VG 220). NTPC, NLC India, state power utilities, and Coal India subsidiaries are Balmer Lawrie's largest PSU customers nationally.
For procurement teams at PSUs, defence establishments, Indian Railways units, state corporations, and private plants serving PSU customers — the Balmer Lawrie sourcing channel matters as much as product specification.
Balmer Lawrie is a Schedule-A Mini Ratna Govt of India PSU under Ministry of Petroleum & Natural Gas. Balmerol gear oils satisfy "preference to make-in-India + PSU-manufactured" procurement clauses automatically — relevant for defence, Indian Railways, state-utility and central-PSU buyers. Vendor empanelment and approval timelines are typically faster than for private-brand alternatives.
Vasundhara is GeM-registered seller. Balmerol HP PLUS industrial gear oils + automotive gear oils + open-gear compound available under standing rate contract for PSU buyers. GFR-2017 compliant for deferred-payment supply. Direct purchase orders accepted via GeM portal under streamlined Direct Procurement / L1 mode for rate-contracted SKUs.
Stocked grades (VG 220, 320, 460 EP + SAE 90/140) ship same-day from Secunderabad warehouse. Synthetic grades typically 3-5 working days. Open-gear compound stocked in bulk during sugar/cement seasons. Pan-India dispatch via authorised transport network for outside-Telangana orders.
One PO for Balmerol HP PLUS gear oils + Balmerol Protomac greases + Balmerol Catmatsu hydraulic oils. Reduces vendor count, simplifies GST reconciliation, single accountable contact for the maintenance lubricant kit. See our Balmerol Protomac greases companion page.
Per-batch test certificates (TDS, MSDS, COA), BIS conformance reports, manufacturer authorisation letters from Balmer Lawrie. Ministry-of-Petroleum manufacturer audit trail. Suitable for ISO 9001 / IATF 16949 / Defence / Railways audit requirements. Pre-shipment sample retention available on request.
Gear oil viscosity selection per AGMA + DIN guidelines, drain-interval optimisation via oil-sample analysis, cross-equivalence mapping (Veedol ↔ Balmerol ↔ Servo ↔ Castrol grades), and contamination-event troubleshooting. Free for projects where Vasundhara is the supply partner.
Standard packaging across the Balmerol HP PLUS gear oil range. Bulk pricing on volumes >1,000 L.
| Pack Format | Volume | Typical Use Case |
|---|---|---|
| Pail (HDPE) | 20 L | Single-gearbox top-up, small workshop, sample-and-trial orders |
| Drum (HDPE / steel) | 50 L | Mid-duty gearbox fill, regular maintenance stock |
| Barrel (steel) | 210 L | Industry-standard for plant maintenance stores; full gear-case fill on cement/steel mill drives |
| IBC Tote (HDPE in steel cage) | 1000 L (1 MT) | Bulk supply for high-volume PSU users — refineries, large cement plants, sugar mills |
| Bulk Tanker | 3,000-5,000 L+ | Direct-to-tank delivery for large plants — quoted on case-by-case basis under PSU rate contract |
Visit Our Office: H.No. 10-2-309, Flat No. 201, Sudha Vaishnavi Residency, Street No. 4, West Marredpally, Secunderabad, Telangana 500026 | View on Google Maps
Common questions from PSU procurement officers and plant maintenance buyers sourcing Balmerol HP PLUS gear oil through Vasundhara.
Balmerol is the lubricants brand of Balmer Lawrie & Co. Ltd, a Schedule-A Mini Ratna Govt of India PSU operating under the Ministry of Petroleum & Natural Gas. HP PLUS is the industrial gear oil sub-range covering ISO VG 100 to 680 EP grades. Manufacturing is done at Balmer Lawrie's BIS / ISO 9001 / ISO 14001 / ISO 45001 certified plants. The brand has 100+ years of presence in India (Balmer Lawrie was founded in 1867).
All four meet ISO 12925-1 / DIN 51517 Part 3 specifications with comparable performance in normal industrial use. Balmerol's structural advantage is PSU-manufactured status — relevant for buyers with Make-in-India / PSU-preference procurement clauses (defence, Indian Railways, state utilities, central PSUs). For private-sector buyers without such preferences, all four are commercially-equivalent; selection comes down to price, availability and existing OEM approval at the specific gearbox model. Vasundhara supplies Veedol AND Balmerol from the same warehouse — common for buyers running both brands across different gearboxes.
Yes. Balmerol HP PLUS industrial gear oils, SAE 80W-90 and 85W-140 automotive gear oils, and open-gear compound are all available under GeM rate contract for PSU buyers — Indian Railways, BHEL, NTPC, NLC India, Coal India, ONGC, SAIL, RINL, Defence establishments, state cement corporations, state transport corporations. Vasundhara is a GeM-registered seller. GFR-2017 compliant for deferred-payment supply with documentation pack including Udyam-MSME registration, manufacturer authorisation from Balmer Lawrie, and standard PSU procurement compliance suite.
Yes. Balmer Lawrie has been a long-standing Indian Railways supplier across multiple lubricant categories. Balmerol HP PLUS VG 100/150/220 grades are commonly issued to Railway workshops for traction-motor reduction-gear cases, locomotive auxiliary gearboxes, and rolling-stock final-drive axles. Specifications align with IRS / RDSO specs for industrial gear oils where applicable. Per-batch test certificates and BIS conformance reports support Railway audit requirements.
For well-maintained industrial gearboxes with proper filtration (10-micron return-line filters) and bulk-oil temperature staying below 80°C, Balmerol HP PLUS VG 220 EP typically delivers 6,000-12,000 hours of service life. With synthetic PAO grades the interval extends to 15,000-25,000 hours. Drain-interval optimisation via periodic oil-sample analysis (TAN/TBN, viscosity, water content, particle count, wear-metal spectrometry) typically extends intervals 20-40% over manufacturer-default schedules.
Yes — mineral-base Balmerol HP PLUS grades are compatible with most other mineral-base gear oils from major Indian and international brands at the same viscosity grade. Top-up volumes <20% of system capacity rarely cause issues. Synthetic PAO grades are also miscible with mineral oils but with some performance reduction. Best practice: maintain single-brand single-grade policy per gearbox to avoid unintended additive interactions and to simplify oil-sample analysis interpretation. Document any cross-brand top-up event in the equipment's lubrication log.
Yes. Balmerol HP PLUS industrial gear oils meet IS 8406:1993 (Specification for industrial gear oils) and IS 1118:1992 (Specification for industrial mineral oils) where applicable to the grade. BIS-marked grades available for buyers requiring formal BIS certification on the supply. Per-batch BIS conformance reports provided as part of the standard documentation pack.
Yes. Vasundhara Performance Solutions Pvt Ltd is the authorised Balmer Lawrie / Balmerol industrial lubricant distributor for Hyderabad, Telangana and Andhra Pradesh. We supply genuine Balmerol products manufactured by Balmer Lawrie & Co. Ltd, with full manufacturer authorisation documentation provided on enquiry. For our complete Balmer Lawrie portfolio (gear oils + Protomac greases + Catmatsu hydraulic oils + cutting oils), see our Balmer Lawrie brand page.
Complete Balmer Lawrie portfolio supplied by Vasundhara — single-vendor sourcing for PSU and Defence procurement under GeM rate contract.
Send us your viscosity grade, pack size and quantity — quote returned within 4 hours during business hours. PSU buyers: ask for our GeM rate-contract quote.
Request Quote Call Now